Work in progress pics

1
August 6, 2014
Wanna hear a funny story? Here is one. After a period of modelling blues (who can say he is never affected?) I decided to pick it up again with the most easy kit I possesed. This Starter kit is not only very basic, it was even pre-painted!
2
August 6, 2014
So I thought: this is going to be easy! But it never is... Soon I found out that the kit has 2 versions in it, and the one I wanted to build did not correspondend with the pre-painted model. It had 2 light bulbs on the roof which shouldn't be there...
3
August 6, 2014
So I removed the light bulbs, I also removed the raised area at the back where the license plate would be, and while I was at it, I also removed all the cast-in detail which I didn't like.
4
August 6, 2014
Then I stripped the model completely, I accentuated the panel lines, and I put it in pink Tamiya primer. Finally I sprayed 2 coats of TS-08 from the rattle can. So now I am back where I started, only with a correct model...
5
August 6, 2014
Next I had to re-model the dashboard which was cast with a lot of flash. I used plastic strip for this job.
6
August 6, 2014
I have no clue why the Starter designers think that this 250 GTO has only 1 exhaust, but it only took me a piece of soldering tin and some rubber tubing to correct this error. Now all 12 cilinders can boost out their power through the proper exhausts...
7
August 12, 2014
Next step: fixing the decals in place.
8
August 12, 2014
The white roundels are all the same size, which is not exactly how it should be: the front decal is ok, the 2 at the sides are a bit too small and the one at the rear is a bit too large.
9
August 12, 2014
But you would only notice this with reference pics next to the model. After fixing the decals I cut them at the panel lines.
10
August 12, 2014
Finally I apply 2 Gunze Sangyo gloss coats. Now the model can dry for a week and then I can polish it.
11
August 28, 2014
I let the clearcoats dry for about 10 days, and then I started to polish the whole body. This is hard to see on the pictures because I manipulated the body quite a lot afterwards resulting in some fingerprints...
12
August 28, 2014
Once the body will be fixed to a base plate I will polish it again. I also polished the clear resin haedlights because the surface was very rough.
13
August 28, 2014
Next I painted the interior black and I fitted the front window with chrome trim (BMF). I aslo started painting the dials and dashboard (not finished yet).
14
August 28, 2014
Because this kit has no head light covers, I purchased a little 'Remember' transkit including (amongst others) wonderful PE headlight covers.
15
September 11, 2014
Next I cut the window part in smaller pieces, because I only want to use the front and rear windows.
16
September 11, 2014
The side windows were not very good, so I replaced them by thin plexi, cut to size. I also simulated the slide window by engravings.
17
September 11, 2014
Next I painted the interior flat black.
18
September 11, 2014
The bottom interior was painted and assembled as well. The steering wheel, the gear lever and the decals are from the detail set.
19
September 11, 2014
Next I assembled the wire wheels and I dry fitted them into the chassis. The width and ride height were adjusted this way.
20
September 11, 2014
Now I have to remove the chassis from the body again to be able to fix the rearview mirror and some small deflectors at the rear of the wheel arches.
21
October 6, 2014
So once the rearview mirror and the small deflectors at the rear of the wheel arches were fixed, I closed the model again and attached it to a baseplate.
22
October 6, 2014
You can see the small deflector which I scratched from aluminium sheet just behind the rear wheel.
23
October 6, 2014
Here the deflector is clearly visible.
24
October 6, 2014
I also fixed the supports for the rear jack and I also filled the cooling vents with flat black paint.
25
October 6, 2014
At the front I added the front jack supports, I chromed the main radiator surroundings and I fixed the aftermarket fog lights.
26
October 6, 2014
I also decided not to use the kit headlight covers since they are solid resin parts which are not very realistic. Instead I searched in my scrapbox and found Porsche 917 covers which I adapted to fit the Ferrari lights.
27
October 17, 2014
A few pictures of the Ferrari with finished headlights and taillights...
28
October 17, 2014
A few pictures of the Ferrari with finished headlights and taillights...
29
October 17, 2014
A few pictures of the Ferrari with finished headlights and taillights...
30
October 28, 2014

Komentáře

1 6 August 2014, 11:41

Guy Golsteyn Autor
I started this 1:43 kit a few days ago; now the body paintjob needs to dry for a while...

7 August 2014, 17:19

Steve Wilson
...
Nice progress Guy, great attention to detail as usual🙂8)👍

7 August 2014, 17:28

Phil Marchese
Pretty!

7 August 2014, 18:22

Guy Golsteyn Autor
I made some progress before we drive off to the Garda Lake😉 See you in little over a week😉

12 August 2014, 15:49

Phil Marchese
Guy, I have a question...did you subtly shadow some recesses or are these the natural 3D shadows showing from your camera/lighting angle?

12 August 2014, 15:54

Steve Wilson
...
Well done progress Guy... Give my love to one of my favourite places Lake Garda8)

12 August 2014, 16:00

Guy Golsteyn Autor
@Phil: no, I didn't shadow anything (yet)...

12 August 2014, 16:13

Phil Marchese
OK thanks...following with interest...still trying to transfer learning from planes and antique cars to post war styles.

12 August 2014, 20:13

Bill Spargo
Awesome as usual Guy

13 August 2014, 00:46

Guy Golsteyn Autor
I made some progress updates.

28 August 2014, 21:00

Guy Golsteyn Autor
Progress was documented by new pics😉

11 September 2014, 18:09

Es-haq Khosravi
Excellent job!

11 September 2014, 19:39

Steve Wilson
...
43rd's are too small for my sausage fingers, and I can't cope with the bad language that omits my facial orifice when I have tried. But I do admire the builders who can work on these smaller scale models.
Guy, your builds continue to amaze and also inspire me, that is a wonderful little miniature Ferrari, excellent...

11 September 2014, 20:15

Bill Spargo
Beautiful, as usual

11 September 2014, 22:43

Es-haq Khosravi
That's great!

6 October 2014, 12:38

Project info

Ferrari 250 GTO 64 - Le Mans 24 Hrs 1964

98 obrázky

1:43

Dokončeno

1:43 Ferrari 250 GTO´64 #5575GT Ecurie Francorchamps (Starter )

1:43 Transkit for Ferrari 250 GTO '64 (Remember TK03)

Všechna alba

Zobrazit všechna alba »