Panzerhaubitze 2000 - WIP

1
April 12, 2015
the box
2
April 12, 2015
the tools for the first construction
3
April 12, 2015
chassis
4
April 12, 2015
chassis
5
April 12, 2015
torsion bars
6
April 12, 2015
fixation
7
April 12, 2015
box with chain links
8
April 12, 2015
contents of the box (single parts)
9
April 12, 2015
content in piles
10
April 12, 2015
first segment
11
April 12, 2015
fully movable - without glue
12
April 12, 2015
snow grippers and installation help
13
April 12, 2015
tracks done - 97 links
14
April 12, 2015
tracks done - 97 links
15
April 12, 2015
barrel lock for travel - movable!!!
16
April 19, 2015
Main gun 155mm
17
April 19, 2015
Main gun 155mm
18
April 19, 2015
some PE-parts on the upper hull
19
April 19, 2015
20
April 19, 2015
air intake and other parts
21
April 19, 2015
holder of the blade
22
April 19, 2015
ready for priming
23
April 19, 2015
primed chassis
24
April 19, 2015
primed tracks
25
May 6, 2015
wheel with stencelit mask - before priming
26
May 6, 2015
colors to mix for pre-dusting
27
May 6, 2015
pre-dusted chassis
28
May 6, 2015
pigments + color for a light muding
29
May 6, 2015
mud in the chassis
30
May 6, 2015
same chassis with other light
31
May 6, 2015
for more contrast
32
May 6, 2015
done, always a little bit wet
33
May 6, 2015
pigments for a little bit more mud
34
May 6, 2015
next "mud-step"
35
May 6, 2015
colors for the tracks
36
May 6, 2015
primed tracks and painted rubbers
37
May 6, 2015
color for the track inside
38
May 6, 2015
tracks are ready
39
May 6, 2015
chassis with it's "new shoes" - right side
40
May 6, 2015
chassis with it's "new shoes" - left side
41
May 6, 2015
chassis in detail
42
May 6, 2015
drive sprocket in detail /w track
43
May 10, 2015
Wedding of Upper hull & chassis
44
May 10, 2015
Wedding of Upper hull & chassis
45
May 10, 2015
putty work
46
May 10, 2015
putty work
47
May 10, 2015
Work of one day ...
48
May 10, 2015
Enters grid at the rear
49
May 10, 2015
Enters grid at the rear - bent
50
May 10, 2015
Enters grid at the rear - bent
51
May 10, 2015
Etch parts for the grid
52
May 10, 2015
Grid ready for use
53
May 10, 2015
Grid ready for use
54
May 10, 2015
installed grid
55
May 10, 2015
Lifting tool on the nose plate
56
May 10, 2015
Making the 2nd grid
57
May 10, 2015
grid in progress
58
May 10, 2015
grid ready for use
59
May 10, 2015
mud flaps for the rear
60
May 10, 2015
built 😉
61
May 10, 2015
License plate - & taillight holder
62
May 10, 2015
rear cross
63
May 11, 2015
64
May 11, 2015
65
May 11, 2015
66
May 11, 2015
67
May 11, 2015
68
May 11, 2015
69
May 11, 2015
70
May 11, 2015
71
May 11, 2015
72
May 11, 2015
73
May 11, 2015
74
May 11, 2015
75
May 11, 2015
76
May 16, 2015
box on the cannon tube - PE and original
77
May 16, 2015
mantlet with smoke discharger
78
May 16, 2015
baggage basket
79
May 16, 2015
Turret in progress
80
May 16, 2015
baggage basket in detail
81
May 16, 2015
strap fittings
82
May 16, 2015
turret ready to paint
83
May 16, 2015
84
May 16, 2015
gun cradle in detail
85
May 16, 2015
V(0) measuring device from behind
86
May 16, 2015
older of the front warning light
87
May 16, 2015
rear warning light
88
May 16, 2015
space of the Ammo loader 1
89
May 16, 2015
front of the turret
90
May 16, 2015
baggage basket in detail
91
May 16, 2015
mesh-wire cover of the compressor storage
92
May 16, 2015
both smoke dischargers
93
January 10, 2016
My used colors
94
January 10, 2016
For masking of the camo spots
95
January 10, 2016
The green hull ...
96
January 10, 2016
... and the turret
97
January 10, 2016
Black spots ...
98
January 10, 2016
... also on the turret
99
January 10, 2016
masking the brown spots
100
January 10, 2016
done
101
January 10, 2016
basic paint finished
102
January 10, 2016
basic paint finished
103
January 10, 2016
basic paint finished
104
January 10, 2016
basic paint finished
105
January 10, 2016
Painting the barrel cover, called "NATO-Pariser" 😉
106
January 10, 2016
107
January 17, 2016
PzH 2000 Detailed basic painting & mat silk clearcoat
108
January 17, 2016
PzH 2000 Detailed basic painting & mat silk clearcoat
109
January 17, 2016
PzH 2000 Detailed basic painting & mat silk clearcoat
110
January 17, 2016
PzH 2000 Detailed basic painting & mat silk clearcoat
111
January 17, 2016
PzH 2000 Detailed basic painting & mat silk clearcoat
112
January 17, 2016
Items still undeveloped

Kommentare

12 April 2015, 08:18

Holger Kranich
That all looks quite nice! And the tracks look like a lot of work!!!

12 April 2015, 10:12

Steve Wilson
...
I say!!! Is that a 155 mm self-propelled howitzer on yer Tank???
Or are you just pleased to see me???

12 April 2015, 10:23

Holger Kranich
You nasty boy, Steve😢

12 April 2015, 10:42

Steve Wilson
😄😄😄👍

12 April 2015, 10:46

Roland Roth Autor
Oh Jesus, Steve ... 😄 😄 😄

Yeah, Holger ... you need you need a lot of patience and time, about 8 hours worked for the tracks.
Another 25%, then I have done😉

12 April 2015, 15:46

Steve Wilson
... Lol!!! (((😄 )))

12 April 2015, 15:57

Thorsten Drescher
Da gehen aber noch Kabel an die Zurrung.... 🙂 🙂

12 April 2015, 18:21

Roland Roth Autor
Some progress of the weekend (pic 16 - 24)

19 April 2015, 17:14

Roland Roth Autor
Completion of the chassis (from pic 25)

6 May 2015, 17:18

Wim van der Luijt
Looks real good, like the way you made the chassis all dirty

6 May 2015, 17:22

Roland Roth Autor
The work of one saturday - you can call it "photo-etch day" 😄 (from pic 43)

10 May 2015, 10:18

Aghis Barberopoulos
Very realistic mud and dirt effects!

10 May 2015, 11:25

Holger Kranich
Great work on the "Leitkreuz"!

10 May 2015, 14:21

Roland Roth Autor
Weisst du dafür die korrekte, englische Übersetzung, Holger? 😄 😄 😄

Thx for your comments, mates! 👍

10 May 2015, 15:24

Holger Kranich
Keine Ahnung, "Follow Me"?😄😄

10 May 2015, 15:53

Roland Roth Autor
Muuuuaaaahahahah ...
... aber nicht unrichtig! Tarnkreuz ginge ja auch noch in deutsch - aber camouflage cross ist dann total daneben😉

10 May 2015, 17:37

Ricardo Gonzalez Ramos
Great work Roland. Did you Ad water to the pigments?

10 May 2015, 18:22

Roland Roth Autor
When I will create thick mud, Ricardo, then yes - with white glue. Only for "normal" dust of course not ... 🙂

10 May 2015, 18:31

Vorya hidaryan
Excellent as always 🙂

10 May 2015, 19:10

Roland Roth Autor
After a busy but successful weekend, the chassis is ready for painting😎 👍 (from pic 63)

11 May 2015, 17:54

Mike Kryza
Bei dem "Teil" könnte sogar ich schwach werden... - Einwandfrei! 👍

11 May 2015, 18:21

Roland Roth Autor
Hello, mates ...
My howitzer now is ready to paint - and previously was a lot to glue😉 (from pic 76)

16 May 2015, 17:59

Roland Roth Autor
The camoflage is made. However, there was a lot of effort and difficulty. (from pic 93)
The color made problems in the airgun and the Panzer Putty is not very suitable for camo of the Bundeswehr

10 January 2016, 11:34

Ricardo Gonzalez Ramos
But Nice result!

10 January 2016, 13:28

Holger Kranich
What a nice build so far, Roland! Are the pe´s & rear mudguards included in the kit?

11 January 2016, 10:32

Thomas Mayer
Hattu wieder einmal richtig schön gemacht, Roland!
Wie schätzt du die Anwendung von Panzer Putty ein?

11 January 2016, 11:01

Holger Kranich
Tach Thomas, ich hab das Zeug auch zu Hause. Ist nicht schlecht aber man sollte zügig arbeiten da das Zeug mit der Zeit verläuft/sich verformt. Reagiert halt auf die Erdanziehungskraft. Schön ist, dass es nicht nachfettet. Und es absorbiert Farbreste, nach ein paar Tagen war es wieder komplett schwarz.

11 January 2016, 11:05

Steve killick
I've got this one in my stash but as I've already got a completed Revell version I might just do mine in Dutch colours.

11 January 2016, 17:44

Thomas Mayer
Holgi, ich hab schon meinen Spaß mit Panzer Putty! Erst bekommt man es nicht aus der Dose, dann, zu einer Kugel geformt, zerläuft es in Zeitlupe! Hach!

12 January 2016, 11:29

Roland Roth Autor
Das mit dem "verlaufen", Thomas, hat man im Griff - so schnell geht das auch nicht.
Aber das Legen der Tarnfleckränder geht bei engen Radien gar nicht.
a) Macht man die Wülste etwas dicker, isses ÄUßERST mühselig, das Muster halbwegs genau hinzukriegen
b) Macht man die Wülste dünner, hat man sehr leicht das "Overspray" und darf (wie ich) viel nacharbeiten
Fazit: Für BW-Flecktarnung nur seeeehr eingeschränkt geeignet.

Von anderen Modellbauern hörte ich, dass hier das UHU TAC um Längen besser sein soll ...

12 January 2016, 17:19

Thomas Mayer
Soll auch günstiger sein... 😉

12 January 2016, 17:25

Roland Roth Autor
Leider weiß ich jedoch nicht, ob das TAC auch so oft wiederverwendbar sein soll (oder ist) wie das Panzer Putty. Das würde die Sache dann wieder relativieren ...

Jedenfalls habe ich gerade die letzten Decals aufgebracht.😉

12 January 2016, 17:56

Holger Kranich
Uhu TAC ist günstiger und wiederverwendbar ABER: Das Zeug klebt tierisch an Details und ist teilweise kaum zu entfernen! Bei Oberflächendetails wie Luken oder Scharnieren werde ich das nie wieder benutzen. Da wird man beim Resteentfernen wahnsinnig...

13 January 2016, 08:27

Thorsten Drescher
Die Dose einfach für eine Zeit auf die Heizung legen. Dann wird sie weich und geschmeidig und läßt sich besser verarbeiten. 😉

14 January 2016, 19:22

Roland Roth Autor
Tank howitzer 2000 is provided with decals, the basic detailed painting is finished and the model was sealed with clear cote.

17 January 2016, 17:18

Martin Rauscher
Klasse Arbeit bisher, bin gespannt wie´s weiter geht 🙂

6 February 2016, 17:57

Album info

I built the MENG modell - and it will be the Bundeswehr version in march position (see title pic) 😉

PzH 2000

112 Bilder

1:35

In Wartestellung

1:35 Panzerhaubitze 2000 (Meng Model TS-012)

Panzerhaubitze 2000

Bundeswehr Heer (German Army 1955-now)
PzArtBtl 115 Y-412042 wrong number Katharina
RAL6031 bronzegrün RAL8027 lederbraun RAL9021 teerschwarz

Alle Alben

Alle Alben anzeigen »