Кraz-255-TZ-22 AEROFLOT USSSR (ТЗ-22 Аэрофото СССР)
Kommentare
Album info
Good day, dear colleagues. I finished work on the model three months ago, somehow he did not dare to put it on public display and discussion. Time passed, I decided to ask your opinion. As for the model itself: it is made of resin.
From the additions, the following was done: Barrel. 1) Completely remade the fence and ladder on the barrel (these parts are soldered from wire, since in the etching that comes with the kit, all these parts are flat and will not look on the model) 2) I hung a chain under the barrel 3) On the right side of the barrel, I made a drain pipe with a tap for draining and checking the fuel. 4) I installed the handbrake handle. 5) On the frame of the barrel and the tractor, I made an imitation of the pipelines of pneumatic, hydro, and systems. 6) On the saddle of the tractor frame, I installed a handle for unlocking the saddle lock when disconnecting the barrel from the tractor. 7) Installed additional steps (in the rear, on the sides of the barrel) Cab:
8) In front of the windshield, I made an imitation of air ducts for heating the windshield. 9) Installed the windshield mountings in the open position.
10) On top of the cab, I installed orange lights. 11) I made and installed turn signals on the wings of the tractor.
12) Front and rear lights from Elf. 13) I made side lights next to the headlights. 14) Behind the cab I made an imitation of the wiring connecting the tractor with a barrel. 15) I made handles on the doors and handrails. 16) I installed a dimensional mustache on the wings, in the root part slightly twisted into a spiral. Color of the model: Tamiya acrylic matt, Tamiya varnish glossy and matt. Toning Tamiya, Aeroflot inscription, self-made emblem, all other decks from the set. In conclusion, I would like to say that the work brought positive emotions. The set itself is not complicated, but it requires attention when assembling. This seems to be all that I wanted to write and what to share. Доброго все времени суток, уважаемые коллеги. Работу над моделью закончил три месяца назад, все как-то не решался выставить её на всеобщее обозрение и обсуждение. Прошло время, решил узнать ваше мнение. Что касается самой модели: она произведена из смолы.
Из дополнений выполнено следующее:Бочка.1) Полностью переделал ограждение и лестницу на бочке (эти детали спаяны из проволоки, так как в травлении, которое идет с набором, все эти детали плоские и смотреться на модели не будут)2) Под бочкой повесил цепь заземления.3) С правой стороны бочки сделал сливную трубу с краном для слива и проверки топлива.4) Установил рукоятку ручного тормоза.5) На раме бочки и тягача сделал имитацию трубопроводов пневмо-, гидро-, систем. 6) На седле рамы тягача установил ручку отпирания замка седла при отсоединении бочки от тягача.7) Установил дополнительные подножки (в задней части, по бокам бочки)Кабина:
8) Перед лобовым стеклом сделал имитацию воздуховодов для обогрева лобового стекла.9) Установил распорки крепления лобовых стекол в открытом положении.
10) На кабине сверху, установил огни оранжевого цвета.11) На крыльях тягача сделал и установил поворотники.
12) Передние и задние фары от Эльф.13) Сделал габаритные огни рядом с фарами.14) За кабиной сделал имитацию проводки соединяющей тягач с бочкой.15) Сделал ручки на дверях и поручни.16) На крыльях установил габаритные усы, в корневой части слегка скручены в спираль.Окраска модели: Тамия акрил матовый, лак Тамия глянцевый и матовый. ТонировкаТамия,Надпись аэрофлот, эмблема самодел, все остальные деки из набора.В завершении хотелось бы сказать, что работа доставила положительные эмоции. Сам по себе набор несложный, но требует внимания при сборке.Вот вроде бы и все, что хотел написать и чем поделиться.