...in progress

1
November 25, 2018
2
November 27, 2018
More than enought details for what will be visible at the end.
3
November 27, 2018
Only added some seat belts made from Tamiya tape to the seats, no more details needed inside the fuselage.
4
November 27, 2018
The cabin windows needs some attention but at the end they fitted well.
5
November 27, 2018
I put some weight inside the nose, not sure if it´s neccesary but better than a tail sitter.
6
November 27, 2018
The fuselage halfes needs slight effort to get together.
7
December 2, 2018
Finished the fuselage, all fitts without any puty.
8
December 2, 2018
Same good fitting on the wings, only some sanding is required.
9
December 2, 2018
10
December 2, 2018
Opend some air in- and outlets.
11
December 2, 2018
Opend some air in- and outlets.
12
December 2, 2018
The intake section of the engines was cut.
13
December 2, 2018
14
December 17, 2018
Good fit on the cockpit clear parts.
15
December 17, 2018
16
December 17, 2018
Underside of wing and fuselage transition looks okay with a little sanding.
17
December 17, 2018
On the upper side putty was used to close two gaps.
18
December 17, 2018
19
December 17, 2018
20
December 17, 2018
Position lights were cut off and built new from clear sprue.
21
December 17, 2018
Position lights were cut off and built new from clear sprue.
22
December 17, 2018
23
December 17, 2018
24
December 22, 2018
Scratch built antenna from some etched parts frame.
25
December 22, 2018
The wing fences was sanded down as the were much to thick.
26
December 22, 2018
Some more antennas were added.
27
December 22, 2018
28
December 26, 2018
Added scratch build wipers, the kit parts are too poor detailed
29
December 26, 2018
30
December 26, 2018
31
December 26, 2018
A thin layer of Tamiya Fine Primer shows the last ares which needs more attention.
32
December 26, 2018
33
December 26, 2018
The demarcation lines for the "Oceanic-Camo" were painted with some pics a reference.
34
December 26, 2018
First color was Mr.Hobby C375
35
December 26, 2018
Scratch build of the Self-Defence-Pods wich 027 and 028 are wearing.
36
December 26, 2018
37
December 26, 2018
38
December 26, 2018
39
January 13, 2019
The 027 and 028 are equiped with a radar warn receiver, which the kit didn´t show.
40
January 13, 2019
So I cut off the little cone on the fine and added a piece of sprue.
41
January 13, 2019
Next step was the housing of the RWR.
42
January 13, 2019
After masking the dark blue with UHU Patafix...
43
January 13, 2019
...I sprayed a layer of MR.Hobby C374.
44
January 13, 2019
Unfortunately it´s way to bright for the U-125A.
45
January 13, 2019
I fixed the problem with a layer of tamiya x-23 clear blue.
46
January 13, 2019
47
January 20, 2019
Removed the masks and painted some details.
48
February 13, 2019
It´s allready finished, last steps were some antennas and the landing gear.
49
February 13, 2019
Two RBF-tags were also added to the FOD-covers.
50
February 13, 2019
Here you can see the wipers, look much better than the kit parts.

Comentarios

1 25 November 2018, 18:14

Oleg Bogolei
nice! follow! and wip photos with coments if it is possible)

25 November 2018, 18:57

Daniel Mysak Autor
Welcome, the next pics will be with coments, not much to say about the first one 😉

25 November 2018, 20:10

Cuajete
Interesting. Following.

25 November 2018, 20:58

Łukasz Gliński
Me 2.

25 November 2018, 21:29

Dietmar Kollmann
I take a seat. Ha,ha !

26 November 2018, 12:14

Gordon Sørensen
Following!

26 November 2018, 14:24

Daniel Mysak Autor
The interior is finished, don´t payed to much attention to details which are not visible at the end. Started glueing the fuselage halfes together, needs some effort but could been worse.

27 November 2018, 18:22

Harry Eder
I´m in too! Nice start 👍

3 December 2018, 09:44

Daniel Mysak Autor
Got some progress with the U-125. The fuselage and the wings are joined, they needed some more attention then the fuselage halves.

17 December 2018, 17:10

Ekki
Watching.

17 December 2018, 17:45

Łukasz Gliński
Great progress

17 December 2018, 19:30

Bryn Crandell
Looking good so far. Watching this one!

17 December 2018, 19:57

Spanjaard
looking interesting!

17 December 2018, 20:26

Thomas CONAN
Cool kit.😉

17 December 2018, 20:36

Daniel Mysak Autor
Thanks guys 👍

18 December 2018, 11:55

Daniel Mysak Autor
Today i sprayed the first color of th "Oceanic-Camo", Mr.Hobby C375.

26 December 2018, 15:28

Daniel Klink
Watching!

26 December 2018, 15:36

ice
I'm in too! A great amount of details in a small scale! 🙂

26 December 2018, 16:16

Nathan Dempsey
I used to have one of these, but I traded it. Nice to see one being completed. I'll be watching for sure.

26 December 2018, 18:29

Harry Eder
Nice progress Daniel! 👍

26 December 2018, 19:18

Cuajete
Fantastic work so far.

27 December 2018, 12:36

Daniel Mysak Autor
Thank you guys, it´s nice to know there are some people watching 😉

27 December 2018, 15:04

Felipe Belalcazar
very nice, i love the hawker jet - too bad you dont see them around more often.

27 December 2018, 15:10

Graham Holmes
Daniel, nice work, love the added detail.

A question, do you think that it would be feasible to remove the belly radar and convert the kit to a regular Biz-jet version? I see this is as the only difficult bit, as the windows are no issue.

2 January 2019, 15:11

Łukasz Gliński
That's a good question Graham, I also wonder whether Sword is going to issue any other versions...

2 January 2019, 17:08

Daniel Mysak Autor
@Graham @Lukaz I would be possible, but there will be a big gap to fill. A bit of work would then be necessary to get the right shape of this section. Maybe Sword brings a new fuselage, without radar, stiffener plates, correct windows,...

2 January 2019, 17:39

Gordon Sørensen
Lookng at the sprue pics, it seems the rear half of the bottom radar fairing is molded into the bottom of the wing, so would need a new mold for that too... but everything else should be OK!

2 January 2019, 18:45

Graham Holmes
@Lukasz @Daniel @Gordon, thanks for the responses. The pictures are most helpful and it looks like quite a bit of a job, but worth it. My brother in law worked on this version of the 125 for Beechcraft in Wichita and would love to make a model of it for him. He gave me a manufacturers model of the Hawker 1000, so worth the effort to convert this one for him. I love the looks of this plane.

2 January 2019, 20:20

Daniel Mysak Autor
After nearly a month since my last update the paint and decals are done.

13 January 2019, 16:06

Nathan Dempsey
Coming along nicely.

13 January 2019, 23:44

Glenn
Watching!

14 January 2019, 06:58

Łukasz Gliński
Looks awesome in the ocean camo. Btw. Are the decals for '027' supplied in the box?

14 January 2019, 07:28

Daniel Mysak Autor
Thanks guys 👍
@Łukasz Unfortunately there are only decals for one grey and one blue(028) aircraft in the box, no spare to create other regs. I used some numbers from a Hasegawa T-2 Blue Impulse kit which thankfully @Harry Eder gave to me.

14 January 2019, 16:52

Harry Eder
The decals were from the Platz T-2 Daniel 😉

15 January 2019, 06:21

Łukasz Gliński
Thanks for the info guys. Does it mean this ocean camo is a whif?

15 January 2019, 12:47

Daniel Mysak Autor
No whif, 027 and 028 are painted in two different versions of the Oceanic-Camo.

15 January 2019, 17:23

Bernd Korte
Unusual subject and nice camo!

15 January 2019, 18:42

Łukasz Gliński
Thx Daniel, I find it very interesting 🙂

15 January 2019, 20:48

Cuajete
Yes, very interesting 👍

16 January 2019, 13:13

Alberto Michieletto
Very nice

20 January 2019, 20:41

Alexander Grivonev
Nice detail work, great camouflage colors, great build! 👍

21 January 2019, 06:20

Glenn
Looking great, What paint did you use for the two blues? I like to see a civil version released too! Either a Hawker 800 or the 1000 version go well with all the Amodel Biz Jets.

21 January 2019, 13:27

Daniel Mysak Autor
@Glenn In picture No.23 you can see the color set from Mr.Color I used. It´s special for the Japanese Oceanic Camoflage and will fit perfect for a F-2 or Phantom but didn´t match the light blue of the U-125 at all. So I sprayed a layer of Tamiya Clear Blue on it to get a better result.

21 January 2019, 14:38

Spanjaard
excellent.

21 January 2019, 15:44

Daniel Mysak Autor
I reached the finish line last week, the U-125A is done. Last things to do were some antennas, the landing gear, the wipers and the FOD-covers.

13 February 2019, 18:34

Laurent VILLANUEVA HELLER ForEver
great

13 February 2019, 18:54

Daniel Klink
Impressive result Daniel 👍 Congrats

13 February 2019, 19:01

Stefan Fraundorfer
Congratulations Daniel! A very nice model. I like the camouflage.

13 February 2019, 19:02

Daniel Mysak Autor
Thank you guys. I´m glad I allready finished the jet. I like the result although I am not completely satisfied with the build.

13 February 2019, 19:12

Markus Antonius
it is so refreshing to see this little beauty - a welcome change to all those 109s (even though i like 109s)... 🙂 jasdf always nice to see 🙂

13 February 2019, 19:16

Łukasz Gliński
Very cool build, Daniel, congrats

13 February 2019, 20:20