Mig-23 MLA. trumpeter (red-39)

1
December 23, 2014
The gear bays were first painted with a gloss enamel, mixed to match the Russian colors. The wires were done with Vallejo Model Color and sealed with Future. Flat acrylic paint, a combination of 95% grey (60% black + 40% white) and brown 5% was gassed wi
2
December 23, 2014
3
December 23, 2014
4
December 23, 2014
5
December 23, 2014
6
December 23, 2014
7
December 23, 2014
8
December 23, 2014
9
December 23, 2014
10
December 23, 2014
11
December 27, 2014
The cockpit canopy now follows the fuselage spine outline instead of bulging out. It took a lot of filing to achieve this and then the lower frame had to be reconstructed with white styrene.
12
December 27, 2014
13
December 27, 2014
14
December 27, 2014
Yet another thing that the Trumpeter guys have done wrong is the shape of the jet intakes, symmetrical, when the top corner should have been more rounded... No big deal really, cut offending pieces:
15
December 27, 2014
16
December 27, 2014
add thick, triangular sections of styrene:
17
December 27, 2014
18
December 27, 2014
19
December 27, 2014
20
December 27, 2014
21
December 27, 2014
22
December 27, 2014
23
January 5, 2015
Family MiG 23 is the most complex landing on aircraft of all timpurile.Kit does not miserably in rendering this complexity and all angles are wrong. In ML gear front is too wide, so soil orientation is nothing like it should be (MF version is even worse).
24
January 5, 2015
For the correct ground stance the front landing leg in 1:32nd should extend to 42 millimeters from the bottom of the fuselage (as opposed to 47 provided by the kit), while the lowest point of the burner can should be at 26 millimeters from the ground. The
25
January 5, 2015
26
January 5, 2015
27
January 5, 2015
28
January 5, 2015
29
January 5, 2015
The kit has the rubber that is beautifully detailed but sadly are too thick. The hub has shallow details for the front, while the main ones are fictitious. They had to be replaced. The front wheels: to the left is the accurate version of the hub as oppose
30
January 5, 2015
31
January 5, 2015
For the tires a 1:48th Hasegawa F-4 Phantom main wheel was used, with the hub removed.
32
January 5, 2015
33
January 5, 2015
34
January 5, 2015
35
January 5, 2015
36
January 5, 2015
37
January 5, 2015
38
January 5, 2015
The main wheels were replicated from a Revell MiG 29A wheel copy heavily modified from left to right: 1. wheel trumpeter 2. wheel Revell 3. wheel modified Revell 4. wheel finals
39
January 5, 2015
40
January 5, 2015
41
January 5, 2015
42
January 5, 2015
43
January 5, 2015
The end result would look like this:
44
January 5, 2015
45
January 5, 2015
46
January 5, 2015
47
January 5, 2015
48
January 5, 2015
49
January 8, 2015
For the correct ground stance the front landing leg in 1:32nd should extend to 42 millimeters from the bottom of the fuselage (as opposed to 47 provided by the kit), while the lowest point of the burner can should be at 26 millimeters from the ground. The
50
January 8, 2015
51
January 8, 2015
52
January 8, 2015
Here you can see the main axle being fabricated from a missile body:
53
January 8, 2015
54
January 8, 2015
55
January 8, 2015
56
January 8, 2015
57
January 8, 2015
58
January 8, 2015
This would be the end result, the actuator is a resin part provided in the Aires bay set:
59
January 8, 2015
60
January 8, 2015
61
January 8, 2015
62
January 8, 2015
63
January 12, 2015
The main gear is provided in two versions, both wrong, both too extended: for the ML and for the MF even worse, protrudes to the rear by one third , it cannot be retracted into the bay. The landing gear as is provided is simply unacceptable.
64
January 12, 2015
65
January 12, 2015
66
January 12, 2015
67
January 12, 2015
68
January 12, 2015
69
January 12, 2015
70
January 12, 2015
71
January 12, 2015
72
January 12, 2015
73
January 12, 2015
74
January 12, 2015
75
January 12, 2015
76
January 12, 2015
77
January 12, 2015
78
January 12, 2015
79
January 12, 2015
80
January 12, 2015
The parts were then primed.
81
January 12, 2015
82
January 16, 2015
The cover is shaped wheel set wrong, too right. A change had to be made of bits and pieces that included an F-4 Phantom auxiliary tank.
83
January 16, 2015
84
January 16, 2015
85
January 16, 2015
86
January 16, 2015
87
January 16, 2015
88
January 16, 2015
89
January 16, 2015
90
January 16, 2015
91
January 16, 2015
92
January 16, 2015
93
January 16, 2015
94
January 16, 2015
95
January 16, 2015
The gear bay doors are improved:
96
January 16, 2015
while raised detail was added to the auxiliary fuel tank
97
January 16, 2015
98
January 16, 2015
R-60 missile:
99
January 16, 2015
100
January 16, 2015
101
January 16, 2015
102
January 16, 2015

Kommentit

21 December 2014, 07:42

soheil moghisi
perfect.

24 December 2014, 08:44

Philip De Keyser
Wonderful job sofar 👍

24 December 2014, 08:58

Chris Parsons
Amazing work!

27 December 2014, 17:41

Marko
Very impressive.

5 January 2015, 19:32

Przemek Przybulewski
Outstanding work.

5 January 2015, 21:02

Alexander Perov
great plane requires a lot of work you get very cool

8 January 2015, 15:06

Stefan Schacht
looks very good so far 👍

8 January 2015, 23:30

Marc A.
Impresive job! those wires looks so real...Well done!!

9 January 2015, 13:32

Lucian Millo kirjailija
Thank you all for feedback ! 🙂

9 January 2015, 14:12

Alexander Perov
and your F-4 just super

9 January 2015, 19:57

Lucian Millo kirjailija
Thanks Alexander !

9 January 2015, 20:31

Florin Moldovan
The work of a master!

10 January 2015, 10:53

Maurits van der Aa
This is insane...

11 June 2016, 10:22

Choppa Nutta
attention to detail on the wheels and wells is awesome ! 🙂

11 June 2016, 10:37

Melf Boyens
Super Realism , awesome work!

11 June 2016, 12:33

Album info

My new project is Trumpeter MiG 32 ml, with its many glaring defects corrected with the Aires resin - cockpit plus drive bays and inlet separator plates Zactomodels, very few pieces of kit Eduard exterior and lots of buildings zero!

Kaikki albumit

Näytä kaikki albumit »