Martin Oostrom
Dryfit the front window early in your build. I've heard rumours of a horrible fit near the engine intakes

Łukasz Gliński
Following

Thomas O'Eh Author
Thank you, Martin, for the input, I will keep it in mind!

Qwertzel
Following! I'm building a similar un 1:32. Good luck!

Alexey Bykov
check the rotation of main blades. in kit is made wrong side.
good luck!

Thomas O'Eh Author
thanks for the hint, Alexey. Will be tricky to fix this with the bent rotor blades. Have you seen any built where this was actually corrected?

Alexey Bykov
i made it =) karopka.ru/forum/forum260/topic24215/
you can bend blades in oposite side.

Gergő Takács
Thomas. I built this kit a few months ago. I used also lead as you mentioned. I squeezd it and choped it. I placed them under the cabinfloor and I put some inside of the dashboard cover also.

Mirko Römer
Following!

Thomas O'Eh Author
Thanks for all your advice, in the meantime I have continued on the details in the rear section and addressing the issue with the bad fit of the front window.

Ferenc Sarka
Following. I started the same kit last week. It will be a difficult one.
Good luck!

NorK
@Lead: thought about that?
Liquid Gravity (Deluxe Materials BD38, No)