Christian Bruer Author
Back to ship modelling, USS Santee out of the Trumpeter USS Sangamon. I choose Santee for her Ms17 scheme.
Working on the hull and airwing has already started.
Happy Modelling
Christian

Thomas Wirsching
good luck for this interesting build Christian; will follow with interest!

Spanjaard
first row still available? great 🙂

Christian Bruer Author
You're welcome Thomas and Spanjaard. Still enough seats in the first row.

Jörg Schäfer
I'll sit down when Christian builds a ship..

Thomas Bischoff
always fancied the smaller flattops - count me in!

Christian Bruer Author
Hey Jörg and Thomas, good to see you here in the first row 🙂

gorby
I'll book my seat as well. 🙂

Christian Bruer Author
Welcome gorby 🙂

Rui
I'm also taking a seat 🪑

Christian Bruer Author
Welcome Rui 🙂 Good that you brought your own chair 😁

Alec K
A big one! Following of course 🙂

Christian Bruer Author
Welcome Alec 🙂

bughunter
Watching as this will be a great show! The little aircraft parts looks impressive - I do not complain anymore about small parts.

Guy Rump
Following with interest. 👍

Christian Bruer Author
Welcome bughunter and Guy 🙂

Christian Bruer Author
So let's have a start. Preparing the model for scratchbuilt and PE details.
Happy Modelling
Christian

David Taylor
Watching.

Christian Bruer Author
Welcome David 🙂

WIP on my USS Santee. The kit has some inaccuracies, f.e. hawse pipes in a wrong position. Also a lot of details are missing.
Today's progress, hawse pipes in correct position, framework and bollards added at the bow.
Happy Modelling
Christian

Christian Lehmann
👍

Robert Podkoński
Perhaps I am a bit late, but ready to watch this talent show! 🙂

Christian Bruer Author
Thank you Christian and Robert 🙂

Michael Kohl
Following too.

Christian Bruer Author
You're welcome 🙂

Rui S
I'm in 😎

Christian Bruer Author
Welcome Rui 🙂

Christian Bruer Author
WIP on my USS Santee. More details and scratchbuilt modifications.
Happy Modelling
Christian

Christian Bruer Author
Scratchbuilt aft elevator.

Happy Modelling
Christian

Hang Li
Wow, nice build, following

Christian Bruer Author
Thank you Hang Li 🙂
Forward elevator is done.
Happy Modelling
Christian

Christian Bruer Author
WIP on my USS Santee. The forecastle is nearly done. Several modifications were done to give it a more realistic touch.
I start to replace the forward flight deck supports. Trumpeter designed the as a solid section instead of a I-section.
Happy Modelling
Christian

Agnius
Very interesting! Following 👍

Michael Kohl
Some fine detailing going on here.

Christian Bruer Author
Thank you Agnius and Michael 🙂

Christian Bruer Author
WIP on my USS Santee.
I replaced the supports below the flight deck. The moulded supports were much to thick and the replacements look much better.
The four flight deck supports on the bow are in place now. All in all it comes together as expected.
Happy Modelling
Christian

Alec K
Nice progress Christian, I like all the scratched additions and replacements you are implementing 👍

Christian Bruer Author
Thank you very much Alec 🙂

WIP on my USS Santee.
According to ongoing research the forward flight deck supports needs to be modified.
The forward AA gun plattform has a different shape, therfore I scratchbuilt a new one.
Well, step by step it all comes together.

Happy Modelling
Christian

gorby
You scratch-building work is astoundingly neat.

Christian Bruer Author
Thank you very much gorby 🙂

Christian Bruer Author
WIP on my USS Santee. First PE used fore and aft and more extra details added.
Happy Modelling
Christian

Christian Bruer Author
WIP on my USS Santee. More details added and the sea base started.

Happy Modelling
Christian

bughunter
Wow, what a progress 👍
Happy and successful new year!

Christian Bruer Author
Thank you bughunter 🙂
Same to you and yours 🍀

Christian Bruer Author
WIP on my USS Santee.

Today's progress on the sea base. Once I have maeked the contour of the ships waves I start grinding the contours using a round wire brush in a motor tool. It's a bit dusty, believe me, but it gives a good monitoring to create the contours.

Next step sanding using ssnding paper to breake the rough surface a little bit.

Upon disangaging myself from all the dust a first layer of wall paint was added to the surface in a stippling motion.
The stippling motion create a wavy irregular surface. But to get the final result some more layers are needed. It is important not to paint layers to thick to avoid cracking when the paint dries.

At last I cut off the raised contour marking the boot topping and added a new marking using a line marking tool.

Happy Modelling
Christian

Spanjaard
very nice tutorial about the base. happy new year Christian for you and those close to you 🙂

Christian Bruer Author
Thank you Spanjaard, same to you and yours - a Happy New Year 🙂

Christian Bruer Author
Meanwhile I seperated the AA gun tubs and the catwalks to replace the later with Eduard PE. The bulwarks on the gun tubs are thinned down repsectively replaced by 0,2mm styrene. At the moment I am working to cut of the doors along the catwalks and replace it with oval openings. The openings need to be cutted into the side wall and the plastic from the backside to be thinned out. Unfortunately I missed to do this before I added a lot of details to the flight deck. So carfully working is needed and to keep in mind for better planing next time 😄

Johne 69
So far so mercyless good 👍

Christian Bruer Author
Thank you Johne 🙂

Christian Bruer Author
It has been a while since my latest post, because I was to busy with real work.
Anyhow, I mades some progress, adding the PE catwalks and stairs and start working on the island. I rebuilt the island to make it fit to Santees outfit in late 1942.

Happy Modelling, Christian

Jan Peters
Very nice indeed Christian 👍🏻
Following this from now on 👀

Alec K
Good to see you back at the bench 👍

bughunter
Good to see some progress - the island looks wonderful 👍