MyAlbum: S.M. Unterseeboot U9 Class - U-9
1January 23, 20222 in 1.
S.M. U-9 and CV 707 VESIKKO.
2January 23, 2022Inside Box
3January 23, 2022NOTE:
The thickness of the keel of the ship's nose is wrong, it must be filed/sanded!
4January 23, 2022The thickness of the keel of the ship's nose is wrong, it must be filed/sanded!
5January 23, 2022The thickness of the keel of the ship's bow is incorrect, it must be filed/sanded thinner!
Viewed from the Keel side of the Ship:
Upper Side- corrected.
Bottom Side - the part that needs to be removed is marked.
6January 23, 2022The thickness of the keel of the ship's bow is incorrect, it must be filed/sanded thinner!
Looking from the Ship's Deck Side:
Upper Side - the part that needs to be removed is marked.
Bottom Side - corrected.
7January 23, 2022The thickness of the keel of the ship's bow is incorrect, it must be filed/sanded thinner!
Looking from the Ship's Deck Side:
Upper Side - the part that needs to be removed is marked.
Bottom Side - corrected.
8January 23, 2022The correct fixing of the hull halves of the ship and the correctness of the resulting external joint surface.
The parts have internal stresses, one side of the hull is twisted and bent in one direction, the other side of the hull is facing the other way, and in the end result, the visible displacements of the hull sides remain on the outer surface. The outer surface has a detailed geometry and rivet pattern that cannot be over-sanded for correction and repair. This will ruin all that beautiful finished surface!
The correct fixing of the hull halves of the ship with each other with 8 pins (lower half) is not enough, additional surfaces must be added here, which ensure the correct positioning of the joint surfaces of the hull.
9January 23, 2022
10January 23, 2022NOTE:
The 3 + 3 plates of the ship's deck and ship's hull do not stay correctly, the deck must be brought forward approx. 1 mm in order to align the "joints" of the plates.
11January 23, 2022In order to see how the parts fit together, the ship needs to be "assembled dry".
And here comes a series of surprises.
1. The thickness of the ship's nose keel is incorrect (3 mm on the model, it must be at least 0.5 mm.
2. The Deck of the Ship is short, the sections of the 3 + 3 panels of the first part do not run together, and the gap is about 1mm.
3. Height-depth controls - 3 positions!?, which ones are in use?
4. The correct fixing of the hull halves of the ship and the correctness of the resulting external joint surface.
The parts have internal stresses, one side of the hull is twisted and bent in one direction, the other side of the hull is facing the other way, and in the end result, the visible displacements of the hull sides remain on the outer surface. The outer surface has a detailed geometry and rivet pattern that cannot be over-sanded for correction and repair. This will ruin all that beautiful finished surface!
The correct fixing of the hull halves of the ship with each other with 8 pins (lower half) is not enough, additional surfaces must be added here, which ensure the correct positioning of the joint surfaces of the hull.
5. If you want to look at the ship from below, the base included with the model (the ship's pedestal) does not allow this, the ship is too low from the surface. The base could raise the ship a little higher.
12January 23, 2022
13January 23, 2022
14January 23, 2022
15January 23, 2022
16January 23, 2022
17January 23, 2022There is already not enough free space left.
18January 23, 2022Correct and detailed Machine Guns for Ships - Schwarzlose 07/12 Navale.
GasPatch Models 72219,
19January 23, 2022Priming of Chimney and Deck Details.
20January 23, 2022Photoetching makes the image flicker before the eyes. 😉
21January 23, 2022Bringing the deck forward 1 mm, after that, the side panels (3 + 3 Sections) in the nose fit correctly in place.
22January 23, 2022Bringing the deck forward 1 mm, after that, the side panels (3 + 3 Sections) in the nose fit correctly in place.
23January 23, 2022After bringing the ship's deck forward by 1 mm, a 1 mm strip has been added to the ship's deck, in addition, styrene support has been added below the new joint of the deck. To obtain the correct flatness of the joint surfaces of the deck.
24January 23, 2022Ship's nose keel after grinding thinner.
25January 23, 2022Ship's nose keel after grinding thinner.
26January 23, 2022Ship's nose keel after grinding thinner and bringing the deck forward 1 mm.
After that, the side panels in the nose fit correctly in place.
27January 23, 2022After bringing the ship's deck forward by 1 mm, a 1 mm strip has been added to the ship's deck, in addition, styrene support has been added below the new joint of the deck. To obtain the correct flatness of the joint surfaces of the deck (White Details on the Top).
28January 23, 20223D Printed Chimney Section.
29January 23, 2022The Ship's nose keel after being sanded down and prepared for the addition of photoetched details.
30January 23, 2022The Keel of the Ship's Nose after grinding it thinner and installing the Photoetched Parts.
31January 23, 2022The Keel of the Ship's Nose after grinding it thinner and installing the Photoetched Parts.
32January 23, 2022After bringing the ship's deck forward by 1 mm, a 1 mm strip has been added to the ship's deck, in addition, styrene support has been added below the new joint of the deck. To obtain the correct flatness of the joint surfaces of the deck (White Details in Bow Deck Section Ends).
33January 23, 20223D Printed Chimney Section assembled on the Deck.
34January 23, 20223D Printed Chimney Section assembled on the Deck.
The chimney section can be turned to the upper position or hidden in the deck when lowered.
35January 23, 2022Preparation of photoetched parts for installation.
36January 23, 2022Marking down the locations of the photo-etched parts on the hull according to the drawing.
37January 23, 2022Marking down the locations of the photo-etched parts on the hull according to the drawing.
38January 23, 2022Installation of photoetched parts.
39January 23, 2022Installation of photoetched parts in the Ship Hull.
40January 23, 2022Installation of photoetched parts.
41January 23, 2022Installation of photoetched parts.
42January 23, 2022
43January 23, 2022
44January 23, 2022Preparation of fasteners for radio masts and making the necessary openings in the ship's hull.
45January 23, 2022Preparation of fasteners for radio masts and making the necessary openings in the ship's hull.
46January 23, 2022Preparation of fasteners for radio masts and making the necessary openings in the ship's hull. Photoetched part Installation on the place.
47January 23, 2022Preparation of fasteners for radio masts and making the necessary openings in the ship's hull. Photoetched part Installation on the place.
48January 23, 2022Preparation of fasteners for radio masts and making the necessary openings in the ship's hull.
49January 23, 2022
50January 23, 2022Assembling the Radio Masts Modules and Photo Etched Parts.
51January 23, 2022Radio Masts Modules.
52January 23, 2022Radio Mast Module. The mast can be rotated around its rotation pair, the mast can be raised and lowered onto the ship's deck.
53January 23, 2022Radio Masts Modules.
54January 23, 2022Radio Mast Base Module installation on the Deck.
55January 23, 2022Radio Mast Base Module.
56January 23, 2022Assembled and Installed Radio Mast Module.
57January 23, 2022Assembled and Installed Radio Mast Module.
58January 23, 2022Assembled and Installed Radio Mast Module.
59January 23, 2022Both Radio Masts Modules on the Place.
60January 23, 2022Radio Mast Module.
61January 23, 2022Deck Installation on the Ship Hull.
62January 23, 2022Deck Installed on the Ship Hull.
63January 23, 2022The Ship's Hull and both Deck Sections are together.
64January 23, 2022
65January 23, 2022
66January 23, 2022
67January 23, 2022
68January 23, 2022Installation of photoetched parts.
69January 23, 2022Installation of photoetched parts.
70January 23, 2022Preparation of photoetched parts for installation.
71January 23, 2022Preparation of photoetched parts for installation.
72January 23, 2022In the meantime, you have to check the manual for the sequel. 😉
73January 23, 2022With additions to the bow of the ship.
74January 23, 2022Details.
75January 23, 2022Legend: 9 x measure, 1 x cut!
76January 23, 2022Details and their additions: Searchlight and machine gun base.
77January 23, 2022Details and their additions: Searchlight and machine gun base.
78January 23, 2022Drawings, Details and their additions: Searchlight and machine gun base.
79January 23, 2022A machine gun on its base on the ship's deck.
80January 23, 2022Details and their additions: Searchlight Assembling.
81January 23, 2022A machine gun on its base on the ship's deck.
82January 23, 2022A machine gun on its base on the ship's deck.
83January 23, 2022Details and their additions: Searchlight Assembling.
84January 23, 2022
85January 23, 2022Drilling Jig made from Styrene Plate.
86January 23, 2022Photo Etched Part and Jigs.
87January 23, 2022Photo Etched Part and Drilling Jig 2.
88January 23, 2022Drilling Jig 2, Drilled Deck Section, and Photo Etched Deck Part.
89January 23, 2022Drilling Jig 2, Drilled Deck Section, and Photo Etched Deck Part.
90January 23, 2022Drilling Jig 2, Drilled Deck Section, and Photo Etched Deck Part.
91January 23, 2022Photo Etched Deck Part on the Position.
92January 23, 2022Drilling Jig 1 on the Position.
93January 23, 2022Photo Etched Deck Part on the Position.
94January 23, 2022Photo Etched Deck and Hull Parts.
95January 23, 2022Photo Etched Deck and Hull Parts in Stern Part of a Ship.
96January 23, 2022Photo Etched Deck and Hull Parts in Bow Part of a Ship.
97January 23, 2022Photo Etched Deck and Hull Parts in Bow Part of a Ship.
98January 23, 2022Photo Etched Deck and Hull Parts in Stern Part of a Ship.
99January 23, 2022Major "sheet metal works" have been completed! 😉
100January 23, 2022Overview of "sheet metal work".
101January 23, 20220,3 mm Hole Drilling.
102January 23, 2022Radio Mast Construction:
Changes in the drawing of the radio mast and in the details-knots, which were introduced by studying old photos in detail!
The detail is NOT an "S" but is TRIANGULAR!
103January 23, 2022Radio Mast Detail: The detail is NOT an "S" but is TRIANGULAR!
104January 23, 2022Radio Mast has been raised in Working Position.
105January 23, 2022The Radio Mast has been lowered to the Deck.
106January 23, 2022Radio Masts both are in Working Position.
107January 23, 2022Radio Mast.
108January 23, 2022Details in Focus.
109January 23, 2022The radio mast is in the lowering position, Stern Part of a Ship.
110January 23, 2022The Radio Mast is lowering Position, Starn Part of a Ship.
111January 23, 2022The Radio Mast is lowering Position, Bow Part of a Ship.
112January 23, 2022
113January 23, 2022
114January 23, 2022
115January 23, 2022
116January 23, 2022
117January 23, 2022Deck Details.
118January 23, 2022
119January 23, 2022Comano Tower.
120January 23, 2022Comano Tower Details.
121January 23, 2022Comano Tower Photo Etched Details Forming.
122January 23, 2022Comano Tower Details.
123January 23, 2022Comano Tower Installation.
124January 23, 2022Comano Tower.
125January 23, 2022Update Kit: Navy Machine Guns - Schwarzlose 07/12 Navale - from GasPatch Models (72219).
126January 23, 2022Update Kit: Navy Machine Guns - Schwarzlose 07/12 Navale.
127January 23, 2022
128January 23, 2022Height rudders - what position to leave, what positions to take:
Top - Middle;
Middle - Lower;
Top - Lower?
129January 23, 2022
130January 23, 2022Ship Machine Gun Position in the Deck, Stern Part.
131January 23, 2022The Ship's Deck Superstructure, Command Tower, and Railing Piles have been installed.
132January 23, 2022The Ship's Deck Superstructure, Command Tower, and Railing Piles have been installed.
133January 23, 2022The Ship's Deck Superstructure, Command Tower, and Railing Piles have been installed.
134January 23, 2022Command Tower and Details.
135January 23, 2022The Ship's Deck Superstructure, Command Tower, and Railing Piles have been installed.
136January 23, 2022Machine Gun in the Stern Part of the Ship.
137January 23, 2022Command Tower, Searchlight, and Radio Systems.
138January 23, 2022Preassembled Submarine Model Inspection. Ready for Paint Work.
139January 23, 2022Preassembled Submarine Model. Ready for Paint Work.
140January 23, 2022Preassembled Submarine Model. Ready for Paint Work.
141January 23, 2022Preassembled Submarine Model. Ready for Paint Work.
142January 23, 2022Preassembled Submarine Model, Top View, Ready for Paint Work.
143January 23, 2022Preassembled Submarine Model. Ready for Paint Work.
144January 23, 2022Railing Details preparation.
145January 23, 2022Railing Details preparation.
146January 23, 2022Railing Details.
147January 23, 2022Railing Details Installation.
148January 23, 2022Machine Guns and Searchlight Stands are Painted and Finished w Varnished.
149January 23, 2022Railing details are in place.
150January 23, 2022Radio Systems in Deck.
151January 23, 2022Deck Railing Details.
152January 23, 2022Searchlight in Command Tower.
153January 23, 2022Command Tower.
154January 23, 2022Command Tower Details.
155January 23, 2022Preassembled Submarine Model. Ready for Paint Work.
156January 23, 2022Machine Gun Position, Bow Part of Ship.
157January 23, 2022Command Tower Details.
158January 23, 2022Command Tower Details.
159January 23, 2022Command Tower Details.
160March 13, 2022Searching for a suitable alternative basis concept for the model:
Carriers (made of Styrene Plates).
161March 13, 2022Searching for a suitable alternative basis concept for the model:
Skcetching, Drawings, and Part Section Samples.
162March 13, 2022Searching for a suitable alternative basis concept for the model:
Sketching, Drawings, and Part Section Samples.
163March 13, 2022Searching for a suitable alternative basis concept for the model:
Sketching, Drawings, and Part Section Samples.
164March 13, 2022Searching for a suitable alternative basis concept for the model:
Part Section Samples.
165March 13, 2022Searching for a suitable alternative basis concept for the model:
Part Section Samples.
166March 13, 2022Searching for a suitable alternative basis concept for the model:
Part Section Samples.
167March 13, 2022Searching for a suitable alternative basis concept for the model:
Together Gluing Sections.
168March 13, 2022Searching for a suitable alternative basis concept for the model:
Together Gluing Sections.
169March 13, 2022Searching for a suitable alternative basis concept for the model:
Together Gluing Sections.
170March 13, 2022Searching for a suitable alternative basis concept for the model:
Together Gluing Sections in Base.
Note: Lover Base Dimensions (Diameter) are too small!
Needed Action: For a specific model, the dimensions of the base must be increased to get the proportions in the right relationship.
171March 13, 2022Searching for a suitable alternative basis concept for the model:
Ready Model Pedestal (Bow Bearer) and Sketch and Drawings for the Stern Carrier.
172March 13, 2022Searching for a suitable alternative basis concept for the model:
Ready Model Pedestal (Bow Bearer).
173March 13, 2022Searching for a suitable alternative basis concept for the model:
The Stern Carrier Section Marked in the Styrene Plate.
174March 13, 2022Searching for a suitable alternative basis concept for the model:
Assembled and Glued Stern Carrier Section.
175March 13, 2022Searching for a suitable alternative basis concept for the model:
Stern Carrier Geometry Inspection with the Geometry of the Ship's Hull.
176March 13, 2022Searching for a suitable alternative basis concept for the model:
The Shape and Geometry of the Carrier are Ground according to the Hull of the Ship.
INSTRUCTION:
Use MIRKA sandpaper (Sandpaper Mirka Abranet Ace; 70x198 mm) for processing:
P180 for preliminary work and P320 for finishing!
The fabric side is against the hull of the ship and the abrasive coated side is on the outside!
Grinding movements - along the ship's keel, from the location of the carriers. Check the resulting joint surface!
177March 13, 2022Searching for a suitable alternative basis concept for the model:
Standard Model Pedestal (from Das Werk) versus 3D Printed Base (SLS, PA-12, White) and Carriers (made of Styrene Plates).
178April 10, 20223D Model of The Ship's Stern Carrier.
179April 10, 2022Different Pedestals Concept Ideas in 3D CAD Models Library
(by COBOTEC GROUP LTD.).
180April 10, 2022Choice of Different Pedestals Concept Ideas in 3D CAD Models Library
(by COBOTEC GROUP LTD.).
181April 10, 20223D Model of the Ship's Bow bearer, (M8x1,25)
182April 11, 2022U-BOOTE, Top to bottom:
Top: S.M. U-9 (1/72);
and waiting for their sequel:
Type XXI, U2540 (1/144);
Type VII C, (U82) (1/144);
Type 212A, S 182 (1/144).
183September 8, 20223D Printed Model Pedestals.
Dimension: D = 60 mm; H = 80 mm.
COBOTEC GROU LTD., Model Ship Display Pedestal Kit CTG-A001410_V0_R0;
Process/Printing Technology: HP Multi Jet Fusion,
Material: PA-12.
184September 8, 20223D Printed Model Pedestals.
Dimension: D = 60 mm; H = 80 mm.
COBOTEC GROU LTD., Model Ship Display Pedestal Kit CTG-A001410_V0_R0;
Process/Printing Technology: HP Multi Jet Fusion,
Material: PA-12.
185September 8, 20223D Printed Model Pedestals.
Dimension: D = 60 mm; H = 80 mm.
COBOTEC GROU LTD., Model Ship Display Pedestal Kit CTG-A001410_V0_R0;
Process/Printing Technology: HP Multi Jet Fusion,
Material: PA-12.
186September 8, 20223D Printed Model Pedestals.
The Ship's Bow bearer (left) and the stern carrier (right) have different geometry.
Dimension: D = 60 mm; H = 80 mm.
COBOTEC GROU LTD., Model Ship Display Pedestal Kit CTG-A001410_V0_R0;
Process/Printing Technology: HP Multi Jet Fusion,
Material: PA-12.
187September 8, 2022Searching for a suitable alternative basis concept for the model:
Standard Model Pedestal (from Das Werk) versus New 3D Printed Pedestals (HP MJF, PA-12, Self-color).
188September 8, 2022Searching for a suitable alternative basis concept for the model:
The Ship is Installed with New 3D Printed Pedestals (HP MJF, PA-12, Self-color).
Standard Model Pedestal (from Das Werk) in Front.
189September 8, 2022A suitable alternative Concept for the Model Pedestal:
The Ship is Installed with New 3D Printed Pedestals (HP MJF, PA-12, Self-color).
190September 8, 2022A suitable alternative Concept for the Model Pedestal:
The Ship is Installed with New 3D Printed Pedestals (HP MJF, PA-12, Self-color).
191September 8, 2022A suitable alternative Concept for the Model Pedestal:
The Ship is Installed with New 3D Printed Pedestals.
192September 8, 2022A suitable alternative Concept for the Model Pedestal:
The Ship is Installed with New 3D Printed Pedestals.
193September 8, 2022U-9 Submarine Model on 3D Printed Pedestals and in Vitrine Base, Oak (Concept).
194September 8, 20223D Printed Model Pedestals
195September 8, 20223D Printed Model Pedestal.
196September 8, 20223D Printed Model Pedestals.
Dimension: D = 60 mm; H = 80 mm.
COBOTEC GROU LTD., Model Ship Display Pedestal Kit CTG-A001410_V0_R0;
Process/Printing Technology: HP Multi Jet Fusion,
Material: PA-12.
197September 8, 20223D Printed Model Pedestals.
Dimension: D = 60 mm; H = 80 mm.
COBOTEC GROU LTD., Model Ship Display Pedestal Kit CTG-A001410_V0_R0;
Process/Printing Technology: HP Multi Jet Fusion,
Material: PA-12.
Opmerkingen
16 23 January 2022, 00:58
Dietmar Bogatzkiwhen in service it had only 2 front dive planes the middle was removed
14 March 2022, 15:50
Album info
A brief summary of what has been done through the eyes of the camera.
Corrections, additions, etc., which were successfully introduced into the model on the basis of literature and photographs.
Despite the proper model, adjustments and corrections had to be made.
___
I was able to delete the album in the meantime when I tried to change the order of the photos. But now the situation has been restored.
I hope it is helpful for the fellow fighters.
There is a new challenge ahead - to design and model proper carriers for the model on which to present the model.
3D design and modeling, then 3D print from different solutions.
Coming soon, go for a series of ideas that will materialize in the form of 3D files in the oven!
