1/48 J-29F complete

Markus Antonius
model building factory hodgson 😉

Katya Hodgson Forfatter
It's because i'm so impatient... :/

Soeren R.
Looks good to me and you getting better and better.
Only thing, like I mentioned before, would be the use of some filler for the glue lines on the body 😉
Good to see on picture 7

Katya Hodgson Forfatter
I did use filler to fill the gaps, I do not underside how filler would help get rid of the lines though...

Soeren R.
You need to get some putty into the gaps, sand them down with sanding paper to achieve an uniform surface. (be careful with the panel lines)

You can see what I mean on picture 7 to 8 in my WIP album for the Tunnan
J-29 F Saab Tunnan - Hobby Boss 1/48 - Finished | Album by Floppar (1:48)

Katya Hodgson Forfatter
Last time I tried something similar though I ruined the panel lines. 🙁

You are far better than me.

Soeren R.
Just try it - its a loteasier than it appears.
Use a fine brush and Mr Surface (500 for bigger gaps to 1500 for small and fine gaps) from Gunze and only apply it on the gap (you can protect the surrounding area with Tamiya tape).
After a few hours of drying just remove the excess with a cottom swab and the thinner of Mr Color or use a sanding stick/sanding paper