I-16 mosca in-flight and on the ground

1
October 1, 2018
plastic and PE parts (primed)
2
October 1, 2018
PE primed
3
October 1, 2018
engine cover, almost started cutting before taking the picture...
4
October 1, 2018
with PE Part, primed and then sanded
5
October 1, 2018
Exhaust added in the bottom part
6
October 1, 2018
need to add exhaust here too....
7
October 1, 2018
8
October 1, 2018
nothing in the interior... glue and putty 😛
9
October 1, 2018
ribs added
10
October 1, 2018
11
October 1, 2018
did some cuts to make the engine PE look more like engine... i may look for other solution....
12
October 1, 2018
13
October 1, 2018
pilot seat PE parts, nice
14
October 1, 2018
carpet monster took control stick.... scratch part could be improved
15
October 1, 2018
i have been delaying the paint process, because i need to scratchbuild some details....
16
October 1, 2018
17
May 13, 2022
After a long time, the pair is back in the bench. Applied dark geeen in the upper surfaces, light blue in the lower. Now "a bit" of masking to add the red bands
18
May 13, 2022
Masking removed, a few touches to fix a bit of green taken by the masking tape and to repair a bit of red overspray. Starting to look like I wanted it
19
July 15, 2022
I did not like the colours of the decal for the tail, so I printed one at home.
20
July 15, 2022
Replaced axles of the props with metal. I drilled through the centre of the propeller. I need to add some metal tubing there, to simulate the detail I see I the real size planes
21
August 21, 2022
replacement landing gear. i did not want to use the plastic one, too weak. metal tubing in two sizes, and one thin cable to make it more interesting
22
August 21, 2022
Painted
23
August 21, 2022
On its legs for the first time. Now I see that I forgot one decal, and I need to fix some paint..... macro is really unforgiving
24
August 25, 2022
and this one is completed.
25
August 25, 2022
and the inflight one, as well.
26
August 25, 2022
27
August 25, 2022
28
August 25, 2022
It can not be seen in this picture, but the struts are not correctly placed.... pity, but i like the landing gear as it is, so as it is will remain.
29
August 25, 2022
30
August 25, 2022

Comentários

49 1 October 2018, 22:06

Robert Podkoński
I am absolutely speechless here... I was going to start assembly of the GeeBees in 1/144th scale... but maybe when I will grow more confident... 😉

13 May 2022, 15:48

Daniel Klink
Ah promising progress and very interesting subjects👍

13 May 2022, 18:37

Spanjaard Autor
Thanks Daniel and Robert

14 May 2022, 21:26

Robert Podkoński
Good work, Spanjaard!

25 August 2022, 12:40

Sebastian Meyner
Brilliant tiny work Spanjaard 👍

25 August 2022, 12:43

Spanjaard Autor
thanks Robert and Sebastian
@Robert, at the end you finished the (beautiful) GeeBees far sooner than I finished the I-16's 😉

25 August 2022, 15:10

Greg Baker
oh... Now those are little gems! Now all they need is a tiny DC motor inside. 🙂

You did such a great job on the details, I look at the one on my shelf with pity and remorse. 😉

25 August 2022, 15:20

Robert Podkoński
Somehow I managed... 😉 Thank you, Spanjaard, you're too kind!

25 August 2022, 15:48

Rui S
Nice work on such small kits 👍

25 August 2022, 17:05

Spanjaard Autor
Thanks Rui, and thanks Greg, you are too kind. But Greg, pity and remorse? Why? you have one of the most fantastic model collections in SCM. I am the one with remosmrse when I see my empty display cabinet....
Motor, that is a possibility I have though sometimes. I will certainly ask u about it when I do it

25 August 2022, 17:49

Spanjaard Autor
There will be other 2 later tonight, stay tuned 😉

25 August 2022, 17:50