Subiect început de hetspanjaard

a adăugat un nou photoalbum.
69 3 April 2016, 12:45

Hi hetspanjaard, this kit resulted in one of my favourite models.
Nice to see that it is still built by fellow modellers.🙂 You did a great job with the wheels and the used look - very well done!👍
4 April 2016, 06:48

Nice build. thought of doing the same with my model... or trying to thin the existing spokes...
4 April 2016, 08:12

thanks a lot. both. one of my favourite bikes too. thanks for the compliments. thinning the spokes... never thought of that, i would love to see how it is done. i found some websites with people who relaced them with wire, and decided to give it a go. it took... a lot of time and a good deal of patience to figure it out. and actually i even found some references later that would have saved me some time... but i learnt something 🙂
4 April 2016, 21:30

Very nice build! What a difference those spokes make. Realistic weathering, especially the tires.
6 April 2016, 08:47

thanks Kamal and Gorbygould. it did ended good, but it was so close to finish in total loss that I even managed to add it again to my stash... so eventually i will have two 😄
12 December 2016, 18:52

Wow! those wheels are artwork! love it. and the dusting effekt is great! 🙂
12 December 2016, 19:41

Altough I still find it's a very beautiful result, I couldn't help noticing that the rake of the front fork is quite big? Normally it would be about 27°. On your model it looks more like about 36°. This would result in a good straight on stability but more difficult for quick cornering (essential for a dirt bike). Does it comes like this in the kit, or is it the perhaps deformation in the picture?
13 December 2016, 08:20

Very nice model Spanjaard, great job!
Dust effects are subtle but very effective 👍
29 January 2017, 08:53

thanks Dan, Dale and Kees.
@Lex, sorry, did not see your comment before. Is probably one of the effects of the disaster with the white spirit.... it model broke in the weakest areas, and although i managed to put it back together, some things will never be the same again.....
30 January 2017, 19:47

Well, you can always say that the bike landed too hard after jumping a desert dune😉
31 January 2017, 07:30

ha ha ha, yes, your absolutely right, i was trying to achieve exactly that, and undocumented hard landing 😄 thanks 🙂
31 January 2017, 09:43

yes, tell me about it.... imagine how i felt when it started falling apart in front of my eyes.
31 January 2017, 10:40

I think it feels the same as when you come home, the cat is awaiting you but sits unnatural motionless (normally he comes to greet you right away)... then you see your models on the floor around the cat...
31 January 2017, 10:42

yes, similar, but that could be considered a "natural disaster/act of god/force of nature"😉 (i had a cat for 14 years, i miss him a lot). in this case was my own mistake and i can only blame myself. also i could see it starting to crumble bit by bit, kind of slow motion.....
31 January 2017, 10:56

you can be sure of that 🙂. i have not yet received the washes from Flory models, those are simply clay in water, so no hard "should" come from that, for example
31 January 2017, 11:31

Good looking weathering on civil vehicles can be a challenge! Your's an outstanding job! Well done! I like it a lot!
Must do something like this when time is coming!
31 January 2017, 19:05

thanks Dirk, but be careful not to make the same mistake with the white spirit😉
31 January 2017, 19:09

🙂 Okay, hope I don`t forget it. Btw., the scratchbuilt spokes are great.
31 January 2017, 19:53

thanks, it that was a good deal of time to get them right, but certainly I am happy with it
31 January 2017, 20:25

Now this looks like a proper dirt bike. What a great weathering job, had to look twice to see it wasn't the real thing
1 February 2017, 02:55

Great model, looks very realistic. Just the right amount of weathering in my opinion. Very nice! The only thing I want to mention is the kickstand. It looks fairly new, it could be a little worn where you push it down with your shoes and also where it touches ground. I only mention this because it immediately popped into my mind.
1 February 2017, 08:00

thanks a lot Scott, that is a really good compliment
and thanks also Michael, you are absolutely right. A really good opportunity to do some chipping for example. I will remember that when I build this one again. unfortunately the area where the kickstand is attached was quite weak after the "white spirit incident" that it broke shortly after the pictures were taken. I tried to glue it but I did not manage to get it right. In order to avoid further damage, I decided to leave it as it is at the moment..... it does not make me happy but i have to let it be as it is.
1 February 2017, 18:51

Wow, very realistic. Looks like I could hop aboard and fire it up!
2 February 2017, 02:07

You were absolutely right, I also wouldn't have touched it again. Don't get me wrong, I love it!
2 February 2017, 06:44

thanks Rober and Richard, and of course, thanks again Michael 🙂
2 February 2017, 18:47

Cool used look. I have this bike also in my stash, so yours is an inspiration for me how it can/ should look. 😉
31 August 2017, 05:33

glad you like it Christian. If i can give a suggestion, try to airbrush the golden and red lines, i think it makes a big difference. i wish i would have done better masking, but next time it will be better (when i thought it was gone for ever, i got another one online)
31 August 2017, 18:30

Great looking build sir! I will be trying some weathering on my next builds I think😉
18 September 2017, 20:05

thanks oudlad. i intend to build this one again one day. but for sure, i will not use turpentine when i do the weatering..... or i will be a lot more careful. it almost cost me this build!
18 September 2017, 20:16

Mmm... what a nightmare! How were you using turps? From what I have digested so far with the weathering options I think I'm going to use mainly acrylic products and oil paints.
18 September 2017, 20:37

oil paints is what i was using.... thinned with white spirit/turpentine.... i am currently using using Flory model washes.... pretty harmless and nice result.
18 September 2017, 21:24

caramba, your wonderful dusty enduro racer is a beautiful model!! is it a Michelin T-61 rear tire? i had it on my 1:1 XT 600 in the eighties (i am an older one) 🙂
30 September 2017, 16:26

thanks a lot Thomas. glad you like it. unfortunately, i can not answer my question... the tire is the original Tamiya one, and there is no reference or numbers there to indicate the model.
30 September 2017, 18:19

Spanjaard, the spokes are terrific, huge challenge and must have been a courageous cut, especially the first one! Honda Africa in the future please!
20 July 2018, 21:27

glad you like the bike 🙂. well, i will keep in mind that Honda Africa, but i have a couple of virago's in my stash that i will probably do first😉
20 July 2018, 23:17

Always stays current, relative, in fashion, effective, or in this example, beautiful!
22 July 2018, 20:57

I love it! finally a bike that doesn't look show room new! Nice work!
3 August 2018, 12:08

Great looking Honda, Spanjaard! Like the subtle dust weathering!
3 August 2018, 12:52

Once again Spanjaard, really nice work 🙂
Particularly like the dirt and rust on the engine 🙂
13 September 2018, 11:00

thanks Ingo, Tom and Choppa. this is a two years old build... almost a total disaster, but still one of my favorite builds.... i intend to do it again one day!!!
13 September 2018, 16:36

Still a beautiful build Spanjaard, I'll confess to looking it over from time to time.
13 September 2018, 20:44

wow Spanjaard, great work, very realistic, beautiful the wheels and the weathering!
14 September 2018, 18:08

normally i`m not so interested in bikes but this is still awesome! looks like it`s real
very good work with the rims 👍
ps: your scratch swords are great too 😃
5 October 2021, 15:25

Thanks a lot Simon. This bike, even after the almost total lost, is a build the I love very much 🙂
5 October 2021, 20:19

The swords are also a favourite of mine. One day I need to build another
5 October 2021, 20:20

well, it almost cost me the build, but yeah, it does not look that bad now 🙂
5 October 2021, 23:43

thanks Villiers and Greg. Greg, maybe because this is an old build, in fact, finished right before you joined SCM 😉
6 October 2021, 07:58

Wow, that's cool!! I need to upgrade the finished product I have too!!😊🙌
31 October 2023, 04:10

Right from the dirt track. That´s the way I like it. The spokes make a hell of a difference.
31 October 2023, 07:16

Fantastic! At first I thought I was looking at a photo of the real bike
31 October 2023, 07:37

thanks yeon sung Jung for bringing this old build to the need feed, and thanks for the nice comment. also thanks to Michael and Alberto. dirt looks the way I wanted although it almost destroy the build ....
31 October 2023, 10:32

I'm not entirely convinced that some of those pics are of a model at all 🙂 😉 Lovely muddy work Spanjaard
1 March 2024, 22:09

OK Spanjaard - that build was just slick! The attention to details, the spokes is insane, but the weathering is sublime. ❤️❤️❤️❤️❤️❤️
7 April 2024, 16:31

thanks Григорій Калюжний and CaptGPF for your nice comments
if there is something I can say about the weathering of this model... is not to do it as I did, white spirit almost ruined beyond repair 😉
7 April 2024, 20:51

it is still possible to find it, actually. prices are a different matter, of course. a few days ago, I saw one that was sold for 70EUR.
10 April 2024, 09:58

thanks J35J, up to the weathering stage, I was really happy about it, but then it almost ended in the bin.....
10 April 2024, 10:54

thanks Lode. I actually like it a lot, even if it nearly ended in the bin.... so masterpiece is really nice, but certainly undeserved. back wheel el never rotate anymore, front fork is far too open, stand will no longer be attached.....
10 May 2024, 08:16

Fantastic build, love the weathering. What colour did you use for the Rothmans blue?
10 May 2024, 19:47

thanks for your comment nikfrost. I would love to answer but actually i simply not sure, it was 8 years ago..... unfortunately i did not make a note of tha back in the day. Instructions call for TS-15 i did not use that one for sure.... I checked and found some online lists (cs.finescale.com/fsm..s/f/18/t/112423.aspx) that says X-4 is the equivalent of TS-15. I think I used that. my jar of X-4 seems to match the color of the bike in my cabinet
13 May 2024, 07:13