USS Edwin A Howard

1
March 22, 2019
The basic kit, originally from the Eisenhower era
2
March 22, 2019
Bottom of the hull, sanded to reduce the weld seam lines
3
March 22, 2019
Bow area sanded to reduce the weld seam lines
4
March 22, 2019
Stern area sanded tomreduce weld seam lines
5
March 22, 2019
Deck weld seam lines and anchor chains removed, openings drilled out, and splinter shield reduced in thickness
6
March 22, 2019
Deck weld seam lines and anchor chains removed, openings drilled out, and splinter shield reduced in thickness
7
March 22, 2019
Stern area deck weld seam lines removed and splinter shields reduced in thickness
8
March 22, 2019
Stern area deck weld seam lines removed and splinter shields reduced in thickness
9
March 29, 2019
Beginning work on thinning down open bridge area side bulkhead thickness
10
March 29, 2019
Side bulkhead thickness reduced
11
March 29, 2019
Superstructure side’s before clean up
12
March 29, 2019
Molded on seam lines, vertical & inclined ladder removed and pilot house portholes opened
13
March 29, 2019
Soundroom added (wrong way... oops)
14
March 30, 2019
Brass mesh added for deck wood lattice, with penny for scale reference
15
March 29, 2019
Brass mesh added for deck wood lattice
16
March 30, 2019
Side openings added to bridge, soundroom addition repositioned
17
March 30, 2019
Rear openings added to bridge
18
April 24, 2019
Gun director mount in kit
19
April 24, 2019
Modified for tub mount in Butler Class
20
April 24, 2019
Splinter shields for forward mounts as molded
21
April 24, 2019
Kit parts thinned down
22
April 24, 2019
Bridge are after corrections
23
April 24, 2019
Bridge are after corrections
24
April 24, 2019
Bridge are after corrections
25
April 24, 2019
Bridge are after corrections
26
April 24, 2019
Aft 40mm mount splinter shields thinned down
27
April 24, 2019
Midship 20mm Mount splinter shields thinned down
28
April 24, 2019
Overall view of modified deckhouse
29
April 24, 2019
Stack built- needs detail corrections
30
April 24, 2019
Test fit showing missing bulkhead
31
April 24, 2019
Test fit of stack, needs correction forward to bridge area
32
April 24, 2019
Test fitting so far

Kommentarer

6 22 March 2019, 16:21

Lost_Erik
Good start on that classic.

30 March 2019, 03:50

Carlos Cisneros Författare
Thank you Erik. I'm looking forward to seeing what I can do with this.

30 March 2019, 14:16

ffg7
i have the complete "DE-339 USS John C. Butler Booklet of General Plans 1944" of 11 files 112meg if you need as your stack appears to be wrong.

28 November 2022, 20:11

Guy Rump
Looking good Carlos 👍

28 November 2022, 20:14

Carlos Cisneros Författare
@ffg7, I have some reference materials here, a couple books, plus line drawings, but it's been so long since I worked on the kit, I don't recall what changes need to be made to the stack.
@guy, thank you sir, I think after new years I'll get this one back on the bench. I need to get it completed and over to my friend, for who I am building the kit.

28 November 2022, 21:50

ffg7
fill the grooves on the stack. have a look at this link shipmodels.info/mws_..hp?f=49&t=375923 & you'll see a somewhat large square pipe coming out of the front of the stack which is missing on your model. the 1 out of the back of the stack is squarish but shorter then the front.

29 November 2022, 13:54

Carlos Cisneros Författare
The link doesn't work. But I'll get it figured out when it's time to resume this project. Thanks for the heads up. It's been a few years on this one.

29 November 2022, 16:10