T-34 Airfix - part 2 (adding pigments and track assembly)
1March 8, 2020
Adding dirt....
2
3March 3, 2020
Gently applying it in logical areas...
4March 3, 2020
Subtle on the topsides
5March 3, 2020
Less subtle around the running gear
6March 3, 2020
Next : grime
7March 3, 2020
Same exercise as with the mud...
8
9
10March 3, 2020
More grime at the bottom
11March 3, 2020
Next : dust and dirt
12
13
14March 3, 2020
Most of it was applied on the undersides
15March 3, 2020
The other side
16March 8, 2020
I was not happy with the gun barrel
17March 8, 2020
Trying to make a replacement from stretched sprue - no luck !
18March 8, 2020
Using rod as a replacement
19March 8, 2020
Sanding it into a slight conical shape
20March 8, 2020
The old and the new..
21March 8, 2020
The rubber tracks had a lot of flash - difficult to remove by knife
22March 8, 2020
I "melted" it down by hoovering the tracks above a flame
23March 8, 2020
Not perfect, but better then with what we started with
24March 8, 2020
Time to add the wheels...
25
26March 8, 2020
Fixing the tracks
27March 8, 2020
And we have a... hovercraft tank !
28March 8, 2020
Some weight will keep it on the ground...
29March 8, 2020
The tracks will need a lot of weathering to make them look less toylike
30March 8, 2020
White glue covered the track gap
31March 8, 2020
Painting the tracks with a light gun metal mix
32March 8, 2020
Replacing the gun barrel finally
33March 8, 2020
The original irregular gun barrel - with a difficult to remove seam
Yorumlar
3 March 2020, 22:05
Album info
After having assembled, painted and weathered the kit with oil washes and sponging... it was time for the dirt 🙂 !
63 Görüntüler
1:76
Devam etmekte
Tüm albümler
Tüm albümleri görüntüle »
ölçekli modelleme veritabanı | depo yöneticisi