比例模型数据库 | 模型库存管理

聊天主题开始于 kubafiala

Jakub Fiala
添加了一个新相册
110 10 June 2024, 22:58
Alec K
Very nice! Practice for the Eduard release I presume 😉 😄
 11 June 2024, 00:37
Michael Kohl
Looking sharp.
 11 June 2024, 01:10
Maciej Bellos
Niiice!
 11 June 2024, 03:03
Jakub Fiala 作者
Thank you, mates!
Alec, correct deduction 👍 I see that you are not only a great modeler, but also an experienced detective 😄
Just to clarify, I will not build the new edition in 1:72 scale, but the 1:48 kit, which I have had in my stash for some time.
 11 June 2024, 11:09
Nicolas
Great start.👍
 11 June 2024, 19:28
Mr D
Nice metal finish 👌.
Glad you showed paints,
I'm struggling to find a good white paint that doesn't need a stupid amount of coats to look white... Any recommendations from anyone be appreciated.
Smart Mustang scheme 👍
 11 June 2024, 20:35
Jakub Fiala 作者
Thank you Nicolas and Mr D!
to Mr D: I use Tamiya LP and Gunze H aplied in several thin layers.
 12 June 2024, 13:41
Mr D
Thanks 👍 for the tip, will look into it now.
Cheers Jakub.
 12 June 2024, 15:31
CaptGPF
I agree with Jakob, Tamiya LP white is much easier for me to use. Another trick is to black base the part first, and then lightly coat on the white. For some odd reason, it's easier for me to avoid over-spraying white on that.
 12 June 2024, 16:09
Jakub Fiala 作者
Black base is certainly a good tip 👍
 12 June 2024, 16:20
Clement
Mr Surfacer 1500 White is also a good option if you need a white "paint" with high coverage.
You can polish it afterwards or layer a coat of regular white paint if need be.
Being 1500, it's pretty smooth anyway.
Great mustang, Jakub. I'm looking forward to see it done 🙂
 12 June 2024, 16:45
Bas Tonn
Love that yellow nose !!
 12 June 2024, 16:50
Moreno Baruffini
Well, since I'm also building a p-51 (different molds), I can only say that I have still to learn and practice a lot 🙂
 12 June 2024, 19:13
Guy Rump
Looking great, following. 👍
 12 June 2024, 20:45
Jakub Fiala 作者
Thank you, gentlemen!
 13 June 2024, 09:09
Marek Nagy
Máš to pěkný.
 13 June 2024, 10:00
Jakub Fiala 作者
Dík, Máro! V pondělí ho dotáhnu na klub. Stojím před velkým dilematem a budu potřebovat hromadnou konzultaci 😄
 13 June 2024, 11:17
Juergen Klinglhuber
Great result sp far.... - 👍 👍
 15 June 2024, 14:32
Jakub Fiala 作者
Thank you, Juergen!
 18 June 2024, 16:57
bughunter
Always impressed by your clean paint jobs 👍
 18 June 2024, 17:49
Jakub Fiala 作者
Thanks a lot, Bughunter! Happy, you like it.
 19 June 2024, 10:01
Lukas Muller
zatím krásná práce... jen tak dál 👍
 20 June 2024, 09:59
Jakub Fiala 作者
Dikec....snad to nezmrvim 😄
 20 June 2024, 13:19
Sergej I
Great looking little bird! What did you coat over the alclads with? If anything?
 20 June 2024, 13:35
Jakub Fiala 作者
Thank you, Sergej!
There is no coat over any color. The silver color on wings (LP-11) is polished, Alclads are untouched. I hope no varnish is needed. But i will see after decals....
 21 June 2024, 11:49
Sergej I
Thank you for the answer... brave, hoping all goes well and looking forward for results 👍
 21 June 2024, 12:51
Jakub Fiala 作者
Thanks.
Decals on.
 24 June 2024, 19:05
Alec K
…and they look great 👍
 24 June 2024, 19:22
Zbynek Honzik
This looks more like 1/48th scale than 1/72nd scale. Really cool! 👍
 24 June 2024, 19:26
J35J
Very clean paintjob! Looking forward to see the final result👍🏻
 24 June 2024, 19:32
Jakub Fiala 作者
Thanks a lot, mates!
 25 June 2024, 07:52
Patrick Hagelstein
The decals do look stunning! Did you encounter any issues with setting solutions on the bare NMF parts?
 25 June 2024, 08:08
Jakub Fiala 作者
Thank you, Patrick. Luckily, no problem occurred with the setting solutions. But the decals are not fully set in panel lines yet. Photos are taken immediately after applying the decals. It is not visible on pictures, but there is still a lot of work to do.
 25 June 2024, 11:53
Juergen Klinglhuber
Like the paint job. Very accurate & clean - 👍
 3 July 2024, 17:10
Jakub Fiala 作者
Thank you, Juergen!
Some weathering done. Final completion is near 😄
 20 July 2024, 08:41
bughunter
Another masterpiece is emerging 👍
 20 July 2024, 10:59
Alec K
Agreed!
 20 July 2024, 13:13
Jakub Fiala 作者
Thanks a lot, mates!
 22 July 2024, 08:36
Jarda Malý
no co Ti budu lhát, máš to zase parádní. prostě umíš.
 30 July 2024, 19:44
J35J
Great build and paintwork!👍🏻
 30 July 2024, 19:52
Vincent
Great Metal finish!!
 31 July 2024, 06:56
Neuling
Yes!
 31 July 2024, 08:18
Jakub Fiala 作者
Thank you, gentlemen!
I´ve uploaded first pictures of a finished model. I hope, i will be able to present the whole gallery soon.
 1 August 2024, 12:24
Jakub Fiala 作者
Jardo díkec! Úplně se červenám 😄
 1 August 2024, 12:25
bughunter
Wonderful result! Looking forward for the final pictures.
 1 August 2024, 12:43
Alec K
This turned out excellent. Looks like a much large scale model 👍
 1 August 2024, 14:56
Moreno Baruffini
Simply perfect!
 1 August 2024, 16:18
Maciej Bellos
Oh wow! Fantastic Mustang!
 1 August 2024, 19:42
Jakub Fiala 作者
Thanks a lot, mates, for your kind comments!
Finally i uploaded a set of photos of finished model.
 20 August 2024, 23:21
Guy Rump
Great result, congrats! 👍
 21 August 2024, 07:20
Neuling
Top build and presentation!
 21 August 2024, 08:54
bughunter
Nice pictures of a great model 👍
 21 August 2024, 09:57
Spanjaard
wow, fantastic job. Alclad still looks fantastic after all the decals, detal setting weathering etc, simply perfect. and no clear varnish, amazing.
 21 August 2024, 10:50
Patrick Hagelstein
I totally agree with Spanjaard! The finish looks immaculate! Good to know that Alclad can withstand a beating.
 21 August 2024, 11:17
Jakub Fiala 作者
Thank you very much, mates! I'm really happy, that you like it. Of course, the quality of this kit is not the same as the new Arma hobby or Eduard kits, but finally, it looks like a Mustang 🙂
To Spanjaard and Patrick: yes, Alclads are very good. But be careful, not all Alclads are the same. For example polished aluminium or airframe aluminium ( which i used for external tanks) are not resistant to weathering agents and need to be varnished! I also had to overspray decals on the fuselage with Tamiya LP- 24 semi gloss clear, because thare were visible edges of decals. But that's not a problem of alclad, it's a problem of decals.
 21 August 2024, 17:47
Nicolas
Congrats, great result.
 21 August 2024, 18:35
Spanjaard
thanks a lot for the info Jakub, I was wondering what I did wrong in my own P-51.... I guess my only error was to use airframe aluminium in most of the airplane 😄 😄
well, I believe it was my first use of Alclad 😉
 21 August 2024, 19:17
Jarda Malý
borec!
 21 August 2024, 20:37
Jakub Fiala 作者
Oh, that was really a bad luck, Spanjaard 🙂
Děkuji, děkuji Jaroušku 🙂
 22 August 2024, 10:07
Patrick Hagelstein
Thank you for the detailed explanation, Jakub! Very good to know! 👍🏼
 26 August 2024, 21:21

News Feed »