相册 (128)
所有相册
16 图片
The red Vega
1:48
A bit dramatic?
This is how the Vega would mess up the hairstyles of museum visitors :)
21 图片
The Goblin as it might look in a museum
1:48
The little Goblin won the gold medal for 1:48 aircraft in the Master class in the Euro Model Expo 2025 contest.
172 图片
WIP - Sopwith Camel
1:48
Now the airscrew.
There are 4 little white stripes in the kit as decal, but they are not long enough to go around. I ass...
项目: Camel & Co.
5+101 图片
Wight Quadruplane
1:48
The same in front view. The wheels are also on. So that is the last picture.
178 图片
Full scratched cockpit from wood and metal
1:48
A final look at what made this project so special.
4+
144 图片
Wooden Airscrew for recovery of Mojo
1:48
This church was always shown on the different logos of the "Halberstädter Flugzeugwerke".
项目: Halberstadt D.II
4+
15 图片
Bristol Scout - Work in Progress
1:48
For a used look I used some polishing wool.
项目: Bristol Scout C
140 图片
Work in progress - Fokker D.V
1:48
The last picture of this build report shows the weathering, mostly some oils below the engine. Here you can see the rota...
项目: Fokker D.V
3+
221 图片
F.K.8 Work In Progess
1:48
The front view shows the nice little tooth wheel.
On the prop boss two little PE rings from a Part set covers the wood i...
5+
20 图片
Downscaled original Airco DH-2 6000
1:48
This biplane pusher DH-2 won a bronze medal in the category Planes 1:48 at the Euro Model Expo 2024.
项目: Airco DH-2
6+
108 图片
Albatros Dr.I
1:48
And that is the view from top. I hope, the sprue can hold the heavy model! I secured it with CA.
项目: Albatros Dr.I
3+
87 图片
The most demanding build I have ever done!
1:48
After painting I added fabric belts from HGW Models.
This part is only plugged in and can be removed ea
9 图片
Light blue Albatros C.III
1:48
That is the result after shaping and primer, the front side ....
项目: Albatros C.III
1+
13 图片
Benz Motorwagen 1886
1:24
This model won a gold medal in the category Civil cars in 1:24 Master class at the Euro Model Expo 2022 in Lingen.
Here ...
24 图片
Final shots of Stearman PT-17 Kaydet
1:48
Today I had a Wingman beer in my advent calendar. Take a look at the colors! If that's not a suitable drink for this pro...
3+
14 图片
No Future!
1:48
The kit has some clear parts for the nav lights, but they look like little rods.
I scratched some in drop shape, with wi...
25 图片
Cute F-35
No
This model won a bronze medal in the Egg-Planes category at the Euro Model Expo 2024.
项目: F-35A Egg
191 图片
WIP Sopwith Triplane N533 'Black Maria'
1:48
Already some time ago I made a outragous error, a big mistake and you were kind enough not to point it out to me. When I...
项目: Sopwith Triplane
4+
150 图片
WIP - Sopwith 5F.1 Dolphin
1:48
And a final view!
The scratches on the vickers was fixed with painting Alcalds with brush, other scratches fixed too. Th...
3+
160 图片
Scratched spoked wheels in 1:48
1:48
I started the weathering with little oil paint dots, then added oil and pastels. More later in a new album.
项目: Aviatik 30.40
5+
69 图片
Five seats in one stroke!
1:48
The airscrew is finally finished, with painting, metal parts on the hub and decal.
6+168 图片
Work in Progress: Sopwith Camel Comic
1:48
There is now a turnbuckle in front of the wood of the undercarriage.
4+108 图片
Work in progress
1:48
And with side cowling removed.
Also all the window masks are removed - ok so far.
103 图片
WIP Deperdussin Monocoque (museums machine)
1:48
The rigging is finished, as far as I'm aware of wires.
22 图片
Ship's Camel N6818
1:48
This model won a silver medal in the category "Planes 1:48" at the Euro Model Expo 2024.
6+
187 图片
Halberstadt Cl.II
1:48
After some paint I added the same wire as on the spool with a drop of solder as weight. Nice detail ;)
7+
15 图片
Benz Bz.IV
1:48
I tried to avoid hiding such nice details below a layer of paint, so I used different kind of chemical bowns. One exampl...
70 图片
One upper wing only!
1:48
The last pic of this build is the closed cockpit cover with Vickers MGs. I have no pics from the mounting and rigging pr...
项目: Sopwith Swallow
8+133 图片
WIP of a blue-yellow biplane
1:48
The brake lines are added with lead wire painted rubber black.
3+
140 图片
SE.5a B139 - Work In Progress
1:48
Sync gear, airscrew, hub are finally mounted. A valve (part of the kit) painted brass and added.
项目: S.E.5a B139
6+14 图片
Halberstadt CL.II
1:48
This model won a gold medal in the category aircraft in 1:48 Master class at the Euro Model Expo 2022 in Lingen.
Here to...
7+28 图片
WIP - Ansaldo S.V.A. 5
1:48
I used the upper sides of the second "U" as mounting points for the tailplane struts, since I was not able to cut and be...
项目: Ansaldo S.V.A. 5
107 图片
Work in Progress of soldering a little Piper
1:72
And back to normal.
This has significantly increased the robustness! The whole plane flew off the table onto the floor t...
21 图片
Work in Progress - Ford Model A
1:24
There are little light bulbs provided for the head lamps (y) Be careful, no spares!
139 图片
Airco DH2
1:48
The parts together.
Two control wires comes from the cockpit, runs over the pulley on the strut and comes to the turnbuc...
项目: Airco DH-2
6+96 图片
Kondor D.2, WIP
1:48
After mounting the upper wing (Did I mention that there are moments when I hate superglue? What do I say moments, I mean...
项目: Kondor D.2
5+
21 图片
WIP - Kitbash
1:48
After some painting as preparation I started to apply HGW 3D decals for the rib tapes. After some hours the carrier has ...
4+89 图片
A little Piper
1:48
After painting the covers black I'm happy with the look.
项目: Yellow Piper Cub
2+
77 图片
Morane-Saulnier Type I in russian service
1:48
I also noticed a funny effect on the model! If you lift it with the skis on, the skis are tilted by the center of gravit...
3+
22 图片
Work in Progress of a Junkers F-13
1:48
The kit part has only the big instruments so I added some HGW frames. Also no instrument decals provided. I used the ver...
项目: Junkers F-13
21 图片
Work in Progress Junkers F.13 Dohle
1:48
After the left wall I added the front cockpit cover. On top of it is a clear part - I guess this is the compass. On some...
102 图片
WIP Junkers D.I
1:48
I painted the smooth new sheet metal inside alu and black outside with a brush, and after hardening the cushion with lea...
4+
其他相册
6 图片
Museum Oberursel
My main interest was, of course, in the U.0 rotary engine. It is in running order, and there are traces of castor oil.
12 图片
My favorite tools
To get a template I glued one clamp with CA and sawed, filed and drilled new clamps.
