Volkswagen T1 Samba Bus
- 比例:
- 1:24
- 状态:
- 进行中
- 已开始的:
- December 28, 2017
Build of a VW T1 Samba Bus in a yellow/white scheme. The car finish will not be fabric new, so with a little bit of wear but no excessive weathering.
The model ist from Revell in 1:24 scale and will be mostly build out of the box.
项目库存
完整套件
/zh/search.php?q=*&fkMATEID[]=26314&showast=no&fkWORKBENCH[]=WB26314&page=projects&project=39441
相册
评论
7 January 2018, 15:12
Andreas Niedermayr 作者The tires are made of vinyl. They are (in my opinion) not bad, but they don't show any signs of load, i.e. they are perfectly round. I wanted to try a new way to make sagged wheels. So first, I cut the wheels in the center line for a length of approx. 2 cm, then I took a part of plastic sheet (1mm thick, 1 cm long and 3 mm wide) an glued it in the Slot using CA. The plastic sheet slightly widens the tire. Once the glue was dry, I could sand the lower part of the tires with a file. Not much grinding was necessary, just a little bit so the tire touches the underground not only in one point but on a certain plane.
The effect is very subtle, but visible.
9 January 2018, 20:40