seinä
Wall
March 22, 2025
Markovalmistunut tämä esine
22 March, 22:16
Marko kirjailijaFinished as the black "sharkmouth". Added 3d printed seat, some cockpit parts and gun barrels.3D printet exhausts.Fit is realy good, the decals are excelent and you get an interesting airplane that is not "mainstream".
1 22 March, 22:20
March 19, 2025
March 17, 2025
March 15, 2025
Markovalmistunut tämä esine
15 March, 21:04
Marko kirjailijaPainted according to the later Italeri instructions and using ICM 1:48 Mistel1 for aditional refference. I built this kit 25 years ago, just needed finishing off and painting. Looks realy nice in the end🙂
15 March, 21:12
March 14, 2025
March 11, 2025
March 10, 2025
March 5, 2025
Markovalmistunut tämä esine
5 March, 11:09
Marko kirjailijaFinished OOB in the Israeli "Daled 121" colours. Beautiful kit, fits great, instructions good, fun to build. Made cannons from syringe needles. Decals for tail need white undercoat! only red part is on the decals. The tailband is NOT OK, is straight - problems with application.
5 March, 11:17
February 28, 2025
Markoomistaa tämän kohteen
WWII Russian Air Force Aces La-5 & La-7 Kostylev, Kozhedub, Popkov
SuperScale International 1:72
72-345 Multi-aihe (2)28 February, 16:27
February 23, 2025
Markovalmistunut tämä esine
22 February, 22:53
Marko kirjailijaFinished as "2",great quality decals, nice kit,fits together realy well. The "parasol" wing is a bit more chalangin,
but is managable. Aded details in cockpit, added details to engine, added tube and filter.Full rigging..just as it has to be❤️
23 February, 12:30
February 17, 2025
February 16, 2025
Markovalmistunut tämä esine
16 February, 19:53
Marko kirjailijaGot replacement parts from Smer for broken suport struts . Heller did not react to emails. Kit goes together realy well, part fit is realy good. Made cockpit, detailed engine, 3D printed radiator. Corected tail surfaces, made engine cowling smooth, made wing "bubble". 3D printed Vickers MG.s. Full rigging. Parasoll wings are interesting..but the construction is a bit more challanging then "normal" planes.
16 February, 19:59
February 13, 2025
February 12, 2025
Markovalmistunut tämä esine
12 February, 14:49
Marko kirjailijaBuilt as "PHOOEY", 3D printed wheels, cannons, interior parts. New front engine bank from spares box. Goes together well, decals went down good with setting solutions. Interesting subject, something different from the usual fare..🙂
1 12 February, 14:53
February 7, 2025
February 2, 2025
Markovalmistunut tämä esine
2 February, 19:05
Marko kirjailijaMixed correct colour, made interior, 3D printed parts,gun, pan mags,. Brittle decals, misprinted slightly.Kit goes together incredible for such an old kit.
2 February, 19:08
January 29, 2025
Markovalmistunut tämä esine
29 January, 08:13
Marko kirjailijaMade as REAF #664, using the great decals from "Duel Pack" AZmodel. Used decals for the "invasion stripes", 3D printed resin cockpit parts, seat, exhaust. Used internet info on spinner colour (grey) and decal placement. Nice kit.. too bad they complicated up the nose.
29 January, 08:18
January 22, 2025
Markovalmistunut tämä esine
8 January, 21:03
Marko kirjailijaMade as Israeli D-131 with cartoons. 3D printed cockpit parts, wheels. New wing, Old kit, but rather nice result. Great decals from "Duel Pack" AZmodel, soft and thin..LOVELY.
22 January, 06:34
Markovalmistunut tämä esine
17 December 2024, 21:58
Marko kirjailijaMade as night fighter, TERRIBLE decals, goes together rather well. 3D printed cockpit, cannons, exhausts.. Looks really mean in black..🙂
22 January, 06:26
Markovalmistunut tämä esine
25 December 2024, 16:40
Marko kirjailijaFinished project started 20y ago. 3d printed cannons, wheels, resin cockpit, painted Olive Drab..Good starter kit..
22 January, 06:25
Markovalmistunut tämä esine
1 January, 16:40
Marko kirjailijaNot a pleasant kit, OLD and full of useless complications. Hard to get a good fit around the nose, no radiators(see trough) Added 3d Printed nose wheel, MG.s, made as M. Not too bad decals.. does not look half bad in Satin Black.
22 January, 06:23
Markovalmistunut tämä esine
4 January, 09:46
Marko kirjailijaBuilt as #10, nice kit, goes well together. Decals not bad, lots of small stencils - lovely🙂 Looks good on the shelf🙂
22 January, 06:18
Markovalmistunut tämä esine
19 January, 20:22
Marko kirjailijaBuilt as #231 with part Dutch,part German markings using Special Hobby as inspiration/guide. Added non existant exhaust, 3d printed engine, MG-s, self made sight and parts of the interior. Old decals were terrible.
22 January, 06:16
Markovalmistunut tämä esine
20 January, 20:24
Marko kirjailijaBuilt as #254 with Kopro decals. Lovely kit, a bit old in the tooth..but some clever design choices. Looks realy good now🙂
22 January, 06:13
January 17, 2025
January 15, 2025
January 14, 2025
ICM 1:72December 23, 2024
December 20, 2024
Markoomistaa tämän kohteen
Supermarine Spitfire Mk.Ia "Three Blad Prop"
Kovozávody Prostějov (KP) 1:72
KPM0261 (72261) 2021 Uudet tarrat 20 December 2024, 21:49
December 13, 2024
December 2, 2024
November 25, 2024
November 24, 2024
November 23, 2024
November 7, 2024
November 3, 2024
Markohaluaa tämän tuotteen
Fiat BR.20 Cicogna Battle of Britain 80th Anniversary — Super Decal
Italeri 1:72
1447 2020 Uudet tarrat 3 November 2024, 16:21
November 2, 2024
November 1, 2024
wnolder.php?lang=fi
2024-11-01 18:01:24
2024-10-01 18:24:37
146557
/ajax/wnolder.php?lang=fi&sd=2024-11-01 18:01:24&md=2024-10-01 18:24:37&filter=&w=146557
todo