BF109-F4

1
February 19, 2017
I had to Re-Do the Spinner. My Flat Clear was clogging and had lots of clouds on it. So i removed the color and started again, this time playing with Shadows and Lights.
2
February 22, 2017
First Paintjob done. Need to correct the yellow fuselage ribbon
3
February 22, 2017
4
February 1, 2017
5
February 1, 2017
6
January 31, 2017
7
January 31, 2017
8
January 31, 2017
9
January 31, 2017
10
January 31, 2017
11
January 31, 2017
some wires added
12
January 31, 2017
13
February 9, 2017
14
February 9, 2017
15
February 9, 2017
Here we go 🙂
16
February 9, 2017
my Goal at the End: Gelbe 10 Uffz. Hans Döbrich, 6./JG 5, Petsamo, Finland, September 2, 1942
17
February 2, 2017
18
February 1, 2017
19
February 5, 2017
20
January 31, 2017
21
February 6, 2017
Black Base followed by Dark Rust
22
February 6, 2017
Next Light Rust
23
February 6, 2017
and weathering Set D of Tamiya for the finish
24
February 6, 2017
25
February 6, 2017
26
February 6, 2017
27
February 9, 2017
28
February 9, 2017
The Wheelwells had to be grinded to make the top wing fit properly ** correction!! Eduard numbered the wrong parts for the wheel wells. It used the wells for the 109G with the bigger wheels**
29
February 9, 2017
Some minor gaps at the fuselage-wing section when dry fitting. This is easily solved by first glueing the bottom wing, before ...
30
February 9, 2017
... stretching the top wing upwards until the the gap is closed for glueing
31
February 17, 2017
Finally the last step done. Ready for Paint
32
February 17, 2017
33
February 17, 2017
I love the MRP colors
34
February 17, 2017
Primed
35
February 17, 2017
Their primer is very smooth.
36
February 19, 2017
I tried a new way of Preshading... this is a first, so lets see what happens
37
February 19, 2017
38
February 19, 2017
The Yellow has a great Tone, but that little Preshade i made was allready to strong! i had to Reverse most of the Preshade with Primer in order to make the Yellow acceptable.
39
February 19, 2017
I hope the RLM78 Blue for the Belly doesnt have to get the same going as the yellow :|
40
February 22, 2017
41
March 2, 2017
42
March 10, 2017
This is how my workbench looks after a projekt. No matter how big your table is, at the end you'll be worklng on a space by 20x20cm 😄
43
March 8, 2017
44
March 8, 2017
45
March 8, 2017
46
March 6, 2017
47
March 6, 2017
48
March 6, 2017
Starting weathering the Lower Wing.
49
March 2, 2017
50
March 10, 2017
On the finishing line. Only some touches here and there left and i'll call it done
51
March 13, 2017
52
March 13, 2017
53
March 13, 2017
54
March 16, 2017
55
March 13, 2017
56
March 16, 2017
57
March 19, 2017
58
March 19, 2017
59
March 19, 2017
60
March 19, 2017
61
March 19, 2017
62
March 19, 2017
63
March 19, 2017

Commentaires

29 January 2017, 09:14

gorby
Looking very good so far Roger!

31 January 2017, 16:05

Holger Kranich
Verrrrry nice!

6 February 2017, 13:26

Roger Lustenberger Auteur
Thanks gorby and holger. Im having lots of fun

6 February 2017, 14:00

Spanjaard
excellent cockpit. looking forward seeing it finished

6 February 2017, 22:13

Wim van der Luijt
nice going so far! count me in for the rest...

9 February 2017, 09:19

Bart Goesaert
Me too.. cockpit looks very good.. spinner and screw looks well used and I have to keep the painting method of the exhausts in mind...

9 February 2017, 09:30

Roger Lustenberger Auteur
Thank you guys!! 🙂 please, have a seat and support me to the end. Tipps, hints and feedbacks are always welcome.
@ Bart, the spinner looks alittle too much on the pics than it actually is.

9 February 2017, 11:35

Razvan Coman
Following with interest

9 February 2017, 11:39

Spanjaard
spinner looking good. but it surprise me that you are leaving that mould line in the centre of the exhausts.

9 February 2017, 17:51

Roger Lustenberger Auteur
Hi Spanjaard. The DB 601E had those seams on the exhaust

9 February 2017, 18:20

Spanjaard
my apologies then! i really did not know that. i better remember when i build a 109, otherwise i will probably remove them 🙂

9 February 2017, 22:04

Roger Lustenberger Auteur
No problem 😉 you caught me offäguard! had to check myself first

9 February 2017, 22:07

Spanjaard
🙂

9 February 2017, 22:31

Roger Lustenberger Auteur
some progress with Paints made... what do you think? too much?

19 February 2017, 14:35

Spanjaard
looking good.

19 February 2017, 17:01

Razvan Coman
is ok. a single question: on the vertical part of the chair is chipping between seat-belts? i cant tell from picture
Ps u did not used photo etch parts on pedals?

19 February 2017, 18:27

Roger Lustenberger Auteur
Hi Razvan, i did some small scatches on the seat, but mostly its actually some crystal glue i used to fix the belts. And for the pedals, i never use the photo etched ones because you wont see it at the end when both halfs are together.

19 February 2017, 18:43

arne vd burg
Outstanding job so far Roger , I am watching you progression with great interest.

2 March 2017, 05:55

Wim van der Luijt
That is one very good looking 109!

2 March 2017, 09:33

Roger Lustenberger Auteur
thank you for the support Arne and Wim 🙂 Glad you like it.

2 March 2017, 10:38

Bart Goesaert
It's always nice to see one in non-standard camo's... Splendid work; also how you make the panels come forward...

2 March 2017, 10:45

Roger Lustenberger Auteur
Hey Bart, Thanks. I added a drop of White into the color and lightend each panels this way. check my Do-335, did it the same way.

2 March 2017, 11:00

Roger Lustenberger Auteur
Slowly getting to an end. Missing the Antena & Clearparts and started with the Base and Figure

8 March 2017, 07:02

Razvan Coman
Excelent work till now and the color scheme is unusual (in a very good sense) for the 109's

8 March 2017, 17:40

Roger Lustenberger Auteur
Figure is done, the base awaits for the glue to harden and the antenna wire is missing on the Friedrich. This Weekend its getting its Roll-Out

16 March 2017, 23:21