My SM 79 Sparviero in Spanish service in progress

1
December 16, 2021
The only two pictures of the aircraft
2
December 16, 2021
My plan is to realise the infrastructure for one engine as in this picture
3
December 16, 2021
I'll use one of these engines that I assembled more than ten years ago 🙂
4
December 16, 2021
I have also these resin engines, but I'll probably use the original Italeri pieces for the two engines with the nacas (in Italy the name was "Anello Magni")
5
December 16, 2021
Taking measurements...
6
December 16, 2021
An initial picture with all the aftermarkets 🙂
7
December 16, 2021
8
December 16, 2021
Working on the fuselage windows, using manual tools
9
December 18, 2021
Closing the lower windows; I will finish applying putty on the fuselage
10
December 20, 2021
Very happy because I found in my "spare box" a canopy, coming from the Pavla interior details pack. It will be very useful!
11
December 20, 2021
Very happy also because in the decals for my Cant Z506 there's a blue lighting 😉
12
December 27, 2021
I vacuumformed the upper part of the canopy...(better, I tried) 🙂
13
December 27, 2021
14
December 27, 2021
Almost ready to close.
(A very strong oil wash to highlight the inner part... maybe too dirt 😉)
15
January 2, 2022
16
January 2, 2022
Fuselage halves put together, all ok, bit it's necessary to sand a bit the inner cockpit
17
January 4, 2022
18
January 4, 2022
19
January 11, 2022
Sitting in the box with the Heinkel 🙂
20
January 11, 2022
A first test of the LF decals: they seem very good!
21
January 17, 2022
Ammo MIG Alclad black primer test...
22
January 30, 2022
23
January 30, 2022
Masking the "canopy" 🙂

Commentaires

12 16 December 2021, 10:16

Cuajete
Interesting!
Following.

16 December 2021, 19:18

Cuajete
Good job so far, Moreno! 👍
I have seen the updates by chance. Please, can you write in this part of comments to receive notifications of new updates? Thanks.

2 January 2022, 19:43

Moreno Baruffini Auteur
Dear Cuajete, many thanks! I will follow your suggestions!
Tomorrow I'll post an update 🙂

2 January 2022, 21:36

Cuajete
👍

3 January 2022, 10:23

Moreno Baruffini Auteur
Wings completed and glued to the rest of the plane 🙂 . Now I'm in the "filling sandig" phase...

4 January 2022, 16:53

Cuajete
Looking forward to seeing that 🙂👍

4 January 2022, 18:36

Moreno Baruffini Auteur
Sorry folks but the Christmas break is finished and I have less time for models...I just added a couple of pictures with some intermediate works

11 January 2022, 18:39

Robert Podkoński
Watching for sure!

11 January 2022, 18:49

Cuajete
Don't worry, Moreno... When you resume your projects we will know if you write on these lines 😉

11 January 2022, 19:37

Moreno Baruffini Auteur
Sanding and filling finished and a first night test of the Ammo MIG black primer... Very good product but very very smelling...Mask needed!

17 January 2022, 21:36

Cuajete
👍

18 January 2022, 19:52

Moreno Baruffini Auteur
A short update: I applied the aluminium coat. Despite the picture seems ok, I probably made some errors applying the primer and the finish do not satisfies me... Anyway, I'll try to finish the model touching up some parts.

30 January 2022, 15:48

Cuajete
Looks shiny, Moreno 👍

31 January 2022, 21:15

Album info

Here we are with some pictures of my projects. I'll try to post interesting pics about interesting steps!

SM 79 Sparviero in Spanish service

23 images

1:72

En attente

1:72 SM 79 Sparviero exterior (Eduard 72406)

1:72 SM-79 Sparviero exterior (Pavla Models U72-46)

1:72 SM.79 in Spain part II (LF Models C7212)

Savoia-Marchetti SM.79 Sparviero

Ejército del Aire (Spanish Air Force 1939-now)
Transport Group AISA
Avril 1944 - Madrid

Tous les albums

Voir tous les albums »