GD Panther A

1
June 11, 2023
The example
2
June 12, 2023
Running gear mostly completed, forward quarter
3
June 12, 2023
Running gear mostly completed, rear quarter
4
June 12, 2023
Engine compartment
5
June 12, 2023
Hull hatches insert installed
6
August 13, 2023
Rear plate fittings added
7
August 13, 2023
Turret basic construction
8
August 13, 2023
Test fit of cupola and main gun
9
August 13, 2023
Test fit of turret to check removal of turret to hull top deck gap.
10
August 14, 2023
Right side thinned down under 1mm, left side approx 1.5mm as molded
11
August 14, 2023
Thinned zimmerit pieces added to hull and turret, as well as driver vision flap and hull mg ball mount
12
August 14, 2023
Thinned zimmerit pieces added to hull and turret
13
August 14, 2023
Putty used for missing zimmerit behind mantlet
14
August 16, 2023
Engine compartment area and parts painted up and installed
15
August 16, 2023
Center engine deck piece glued into place
16
August 16, 2023
Left side tool racks added
17
August 16, 2023
Right side tool racks added
18
August 16, 2023
Test fit of current progress
19
January 12, 2024
added PE engine deck screens and cover flange for S-mine launcher
20
January 12, 2024
front deck small bits added
21
January 12, 2024
cleaning rod tube modified to early 1944 style, removing reinforcement strip
22
February 13, 2024
PE on engine deck primed and painted Dark Yellow
23
February 13, 2024
Mud texture added to bottom of sponsons
24
February 13, 2024
Mud texture added to lower hull right side and running gear
25
February 13, 2024
Mud texture added to lower hull left side and running gear
26
February 13, 2024
Close up of r/s sprocket mud and inner surface of track painting
27
February 13, 2024
Close up of l/s sprocket mud, and track inner surface painting
28
February 14, 2024
L/S track on
29
February 14, 2024
R/S track on
30
February 17, 2024
31
February 17, 2024
32
February 17, 2024
33
February 17, 2024
34
February 17, 2024
Coupling device attachment points added and kit jack swapped out for better one from my spares bin
35
February 17, 2024
Test fit frontal overhead view
36
February 20, 2024
Hull vision block and periscopes installed, interior
37
February 20, 2024
hull vision block and periscopes installed, exterior
38
February 20, 2024
cupola periscopes installed, interior
39
February 20, 2024
cupola periscopes installed, exterior
40
February 20, 2024
side skirt armor glued in place
41
February 21, 2024
Hull top glued to bottom
42
February 21, 2024
Final bits added... assembly completed... ready for paint
43
February 21, 2024
Final bits added, assembly completed
44
February 22, 2024
Base coat of Dark Yellow fully on
45
February 22, 2024
Camo colors in
46
February 22, 2024
Camo colors on
47
February 25, 2024
Decals on over a gloss coat
48
February 25, 2024
Decals on over a gloss coat
49
February 27, 2024
Flat coat on
50
February 27, 2024
Flat coat on
51
February 29, 2024
Stowage and final bits & weathering added
52
February 29, 2024
stowage and final bits & weathering added
53
March 1, 2024
54
March 1, 2024
55
March 1, 2024
56
March 1, 2024
57
March 1, 2024
58
March 1, 2024
59
March 1, 2024
60
March 1, 2024
61
March 1, 2024
62
March 1, 2024
63
March 1, 2024
64
March 1, 2024

Commentaires

42 11 June 2023, 21:31

Villiers de Vos
Very nice progress.

12 June 2023, 14:53

Spanjaard
Niiiice

16 August 2023, 21:36

Rui S
I'm in 😎

13 January 2024, 00:54

John
Fantastic job on the muddy running gear. 👍

15 February 2024, 15:17

Carlos Cisneros Auteur
Thanks John. Doing it at this stage makes it so much easier than after its all together and the tracks are on.

15 February 2024, 19:39

Jennifer Franklin
What are you using to create the mud effect? Very nicely done.

17 February 2024, 21:36

Carlos Cisneros Auteur
Thanks Jennifer. I made a concoction of sifted dirt, pigments, water and Future to make the mud.

18 February 2024, 03:27

Jennifer Franklin
Well, it works well; it looks nice and realistic.

18 February 2024, 03:33

Spanjaard
look really realistic indeed. i really like it

18 February 2024, 13:49

Carlos Cisneros Auteur
Thank you Spanjaard 😉

18 February 2024, 21:21

Guy Rump
Looking good, following. 👍

25 February 2024, 08:47

Carlos Cisneros Auteur
Thanks Guy! Just a few more days bench sessions to go on this one.

25 February 2024, 22:29

Mr James
Nice job so far - now for my favourite bit - the weathering 🙂

26 February 2024, 00:02

Carlos Cisneros Auteur
Thank you! Yup, the weathering is when it all starts to really to take final form.

26 February 2024, 02:04

Mark Sherwood
Good looking paint job, nice weathering too Carlos. 🤟🥸👍

1 March 2024, 05:35

Rui S
I agree 👍

1 March 2024, 20:55

Carlos Cisneros Auteur
Mark and Rui, thank you! I'm happy to hear that you like this build.

1 March 2024, 21:04

Mr James
Oh Yeah, lovely job. I like pic 62

1 March 2024, 22:02

Carlos Cisneros Auteur
Thank you Mr James. The head on shot is a hard one to pull off properly to get it all in focus due to depth of field. Of course in this case the muzzle brake is out of focus, but the rest looks pretty good. But the angular lines of the Panther look so menacing from that head on eye level view.

2 March 2024, 00:25

Mr James
Yes Carlos, A good job capturing the menacing angularity of the Big Cat, with only the muzzle out of focus. Well presented

2 March 2024, 01:09