Bacheca
Wall
April 11, 2025
April 9, 2025
Neil Sedgleypossiede questo oggetto
Heuschrecke IVb "Grasshopper" 10.5cm le.F.H. 18/6(Sf.) auf Geschüetzwagen III/IV
Cyber Hobby 1:35
6439MT 2021 Nuova scatola 9 April, 16:31
April 4, 2025
March 31, 2025
March 29, 2025
Neil SedgleyThis is exactly the same kit as the earlier Gunze Sangyo M-7 / G-767 Panzer III Ausf M/N with the addition of a sprue section with the Flamm barrel and track links added as additional armour on the front of the hull.
My boxing has 'Mr Hobby' branding, and the 'Gunze Sangyo' tag on the sprues has been either scrubbed off on the mould or simply cut off the sprues.
Panzerkampfwagen III Ausf M/N convertible Flammpanzer III (F1)
Gunze Sangyo 1:35
G-734 (MV4) 2003 Nuove parti 29 March, 17:48
Neil Sedgleypossiede questo oggetto
Panzerkampfwagen III Ausf M/N convertible Flammpanzer III (F1)
Gunze Sangyo 1:35
G-734 (MV4) 2003 Nuove parti 29 March, 17:41
Neil SedgleyI have three of these Gunze Sangyo High-Tech Model kits and thought that they deserve a comment as they are beautifully put together and not like anything that I have seen offered by other manufacturers at the time. They're essentially the same, so I'll just post the one comment for these three:
G-702 Panzer III Ausf J (1987) + G-705 Panzer III Ausf N (1988) + G-722 Panzer III Ausf M/N (1993)
A slightly smaller (and heavier) box than you'd expect for a 1/35 tank kit because there is hardly any plastic - the box contains:
Basic hull, turret, roadwheels in white plastic.
Two small boxes full of detail parts cast in white metal (sprockets, idlers, engine covers, tools, stowage, hatches, etc. - all of the detail, basically).
Individual track links in plastic on about 25 small sprues. Nicely moulded with open track horns but with ejector pin marks on each link sadly.
Three diameters of metal rod and a woven metal towrope.
Brass turned gun barrel(s) - short/long options depending on Ausf.
PE sheets (the M/N has Schürzen all in PE).
Instructions, which are Japanese but look pretty easy to follow. No painting instructions other than text like 'dark yellow with camouflage stripes'.
Small decal sheet.
Really nice kits for someone wanting a bit of a challenge. Not me, I'm happy just to own them as part of my Panzer III kit collection 😉
1 29 March, 17:07
Neil SedgleyI have three of these Gunze Sangyo High-Tech Model kits and thought that they deserve a comment as they are beautifully put together and not like anything that I have seen offered by other manufacturers at the time. They're essentially the same, so I'll just post the one comment for these three:
G-702 Panzer III Ausf J (1987) + G-705 Panzer III Ausf N (1988) + G-722 Panzer III Ausf M/N (1993)
A slightly smaller (and heavier) box than you'd expect for a 1/35 tank kit because there is hardly any plastic - the box contains:
Basic hull, turret, roadwheels in white plastic.
Two small boxes full of detail parts cast in white metal (sprockets, idlers, engine covers, tools, stowage, hatches, etc. - all of the detail, basically).
Individual track links in plastic on about 25 small sprues. Nicely moulded with open track horns but with ejector pin marks on each link sadly.
Three diameters of metal rod and a woven metal towrope.
Brass turned gun barrel(s) - short/long options depending on Ausf.
PE sheets (the M/N has Schürzen all in PE).
Instructions, which are Japanese but look pretty easy to follow. No painting instructions other than text like 'dark yellow with camouflage stripes'.
Small decal sheet.
Really nice kits for someone wanting a bit of a challenge. Not me, I'm happy just to own them as part of my Panzer III kit collection 😉
29 March, 17:07
Neil SedgleyI have three of these Gunze Sangyo High-Tech Model kits and thought that they deserve a comment as they are beautifully put together and not like anything that I have seen offered by other manufacturers at the time. They're essentially the same, so I'll just post the one comment for these three:
G-702 Panzer III Ausf J (1987) + G-705 Panzer III Ausf N (1988) + G-722 Panzer III Ausf M/N (1993)
A slightly smaller (and heavier) box than you'd expect for a 1/35 tank kit because there is hardly any plastic - the box contains:
Basic hull, turret, roadwheels in white plastic.
Two small boxes full of detail parts cast in white metal (sprockets, idlers, engine covers, tools, stowage, hatches, etc. - all of the detail, basically).
Individual track links in plastic on about 25 small sprues. Nicely moulded with open track horns but with ejector pin marks on each link sadly.
Three diameters of metal rod and a woven metal towrope.
Brass turned gun barrel(s) - short/long options depending on Ausf.
PE sheets (the M/N has Schürzen all in PE).
Instructions, which are Japanese but look pretty easy to follow. No painting instructions other than text like 'dark yellow with camouflage stripes'.
Small decal sheet.
Really nice kits for someone wanting a bit of a challenge. Not me, I'm happy just to own them as part of my Panzer III kit collection 😉
29 March, 17:06
March 28, 2025
March 9, 2025
February 22, 2025
Neil Sedgleypossiede questo oggetto
Vehicle Dials & Placards - Sd.Kfz.250 (all variants)
Alliance Model Works 1:35
LW35096 22 February, 17:49
Neil Sedgleypossiede questo oggetto
Borgward IV Ausf B & PzKpfw III Ausf J Control Tank
Gunze Sangyo 1:35
G-788 (G-788:3800) 1998 Cambiato ??? 22 February, 16:39
February 8, 2025
February 4, 2025
January 30, 2025
January 26, 2025
January 5, 2025
December 30, 2024
December 15, 2024
December 13, 2024
October 9, 2024
August 23, 2024
August 13, 2024
July 31, 2024
July 25, 2024
June 16, 2024
May 6, 2024
wnolder.php?lang=it
2024-05-06 09:34:28
2020-04-11 09:18:37
68394
/ajax/wnolder.php?lang=it&sd=2024-05-06 09:34:28&md=2020-04-11 09:18:37&filter=&w=68394
todo