All my finished models

The 1996 Revell Jagdpanter. All but the jerrycan on this side is from the original kit. The antenna which was supposed to have little antennas at the top broke, so it was replaced by stretched out spruce. 

For my first kit ever worked out pretty oke. Only thing i really strugeld with where de individual track links. 

The machinegun isn't the one that came with the kit. I lost that one a few years back when i started on it. So its replaced by the front half of a regular mg 34 from the tamiya weapons set. 

The Revell 2016 F4U-4 Corsair. Had some trouble with the cockpit and tried to fix it by filing the revell contacta away...
It didn't help as you can see. 

The paint layes are quite easy to see on the plane. But most of the wing detail is still there. 

This plane was my first real experience with decals. Almost all of the went oke. Only the 66 near the nose and the F on the tails didn't work out great 

While assembling i broke one of the landing gear. So i made the plane in its flying mode 

The CMK 1996 LT-35. Apart from a small light that broke off worked out great. Moutend the gun upside down but managed to fix it. 

I decided to make this a Czech tank. Even tho it saw almost all it's combat in German service. But i allready got a lot of German ww2 kits from someone and didn't want to only have German tanks laying around. 

I painted the tank sort of in the Czech camo patern that's in the instructions. The white should probably be more like a ivory. But im happy with the result. 

the Revell 2018 Supermarine Spitfire mk.Vb with Polish 303 markings. Lost quit a bit of de details in the wings because i used to many paintlayers, but apart from that quit happy with how he turned out. 

This is the last model i fully painted with enamels. After this one i transitioned to mostly Tamiya and Vallejo acrylics.  

 

The most right tekst on the right wing is a bit faded. I went over it while still adhearing with an qtip. 

Soldiers from the Tamiya 1988 assault troops. I got 2 big green sprues with 5 of the 8 soldiers on it. they're most likely from an old sd.kfz 251 kit from Tamiya (like the 1988 C variant). with which they where often included. this the NCO. 

I'm building 1 sprue following the instructions. These will also be painted like the instructions lay out. Some infantry will have rolled op camoflaged blankets and shovels from the Tamiya 1996 weapons set A. For most weapons i will use the tamiya weapons set. 

This is 1 of the 2 normal infantry soldiers the sprue comes with. the other one is meant to be mounting over the side of a Sd.Kfz 251. But i'll probably use him for something else. As my first halftrack is in winter camo and for the second i'll use the included soldiers. 

I also got a decals sheet with a lot of german helmet decals. I don't know where these are from but i'm using the one's with the ww1 german flag on the soldiers of this sprue.
 

Tamiya 1995 Sd.Kfz 251 D. Got it almost fully glued, The left wheel broke of. So it is fixed to the model with some green stuff that you can see from the front. I tried to camoflage it as mud but it didn't fully work.
 

Went for a winter camo as i got a second version of the same kit that's still in the box. And i want to make that one a Normandy version. 

 

All the extra added equipment is from the Tamiya German weapons set 

The 1995 Bergepanther from italeri. I vaguely painted it based on pictures online of the tank in The french musée des Blindés in Saumur. Which also are the only real pictures you can easily find online. 

I used a lot of ammo heave mud to fill op the scoop on the back as you can see. I wanted the tank to look like it had been hard at working saving tigers and panthers and hadn't had any time to get a proper cleaning. 

I added some stowage on the back. Like used tools and a jerrycan used for water.
 

The Ammo carrier. I gave him a kar 98 instead of his mg 34 because i want my squad to be slightly realistic. And german ww2 squads only had 1 mg 34 or 42. 

 

The mg gunner. gave his mg34 a magazine from the tamiya weapons set. 

I didn't give him a shovel or camo blanket. Instead he carries a binoculars set and the standard kit 

Tamiya 198- Panzer IV H. This model i also got mostly glued. The gun broke of so i fixed it with some green stuff. 

A lot of the smaller parts of this kit i never got. So i might look a bit bare bones. To combat that i added some stuff on the back and a lot of tracks on the front. 

The last plate of the armoured skirts on this side wasn't there when i got it. because of this and te missing pieces i went for a heavily damaged but still running tank. 

Airfix 2019 T-34/85 with Berlin marking and tank riders. Used some new techniques, like using brighter paints for the top of the tank and using enamel washes beter.  

I used a lot of extra stowage from the russian tank rider kit i got and some weapons from the Tamiya German weapons set. I image that tank riders would gather all the guns and items they could use and load them on the tank.  

I'm really happy with how the weathering turned out. I tried to go for a sandy dusty tank. And i think it turned out really great for my first tank not coverd in any type of wet mud. 

The figures are the Miniart 2019 2nd tank riders set.The figures where way beter than the old Tamiya i'm used to. It also came with a lot of extra weapons and parts to use which i appreciated.  

Another 1988 Tamiya assault troop soldiers. This one is the first real kitbash. I tried to make him look like a grenadier with the potatomasher and the kar98 with the rifle grenade attechment.  

Even tho i learned some new techniques like highlighting which i used on the tankriders i chose not to apply them so he would fit in with his older comrades. The only big difference is that i didn't paint the eyes like i used to do on previous assault soldiers. 

The 2017 Italeri Harrier GR.3. This is my first "modern" jet. It took quite some time because i had some problems with the painting.  

I had some trouble with the decals on this set. Because a lot of them where quite small and with the instructions being in black and white it wasn't always easy to see were they where supposed to go. 

 

The instructions for the underside were alsome a bit confusing. The number decals where supposed to be applied before the weaponmouths but in the instructions it is the other way around. So i cut them up and i find it turned out oke.  

2003 Italeri Sd.Kfz 10 with PaK 38. First vehicle in panzer grey which worked out pretty great. A bit dissapointed that the gun is not posable but well. 

This kit game with a lot of spare bits for jerrycans, PaK 38 ammo and other bits. Lot of it still on the sprue so thats great for some more stoage. 

Used Vallejo diorama mud for the weathering here. Worked out oke. Its fine for thick russian mud like this but for light dust effect it probably won´t work. 

As it is an open top vehicle i would imagine that mud would get everywhere. So some mud was added to the fighting compartment. I maybe went a bit overboard with the mud but i like it.