Prikbord
Wall
David Hheeft een nieuw fotoalbum toegevoegd.
7 afbeeldingen
Richard J Caruana. Print your own Decals
1:48
Project: Print your own decals
Scratchbuilt
1 5 January, 10:03
David H SchrijverAll available and many more on the link below, Richard has made it clear on his web page these are for PERSONAL USE by modellers and NOT FOR USE COMMERCIALLY
web.archive.org/web/..site/rjcaviationart/
5 January, 10:08
David HAdded a new album with link to " print your own decals" hope this is of use to those of you that " print your own"😁
For those that don't know of Richard J Caruana.
For those that don't know of Richard J Caruana.
5 January, 10:02
December 31, 2024
David Hheeft een nieuw fotoalbum toegevoegd.
19 afbeeldingen
This is not all it's cracked up to be …
1:48
Cracking across the tail decals. The gray smear is where I’d already started removing paint then though I really should ...
Project: Phantom FG1 “Colonial Navy “
5+Alle reacties (20) » 14 15 October 2024, 15:59
Patrick HagelsteinI actually think this is a good thing because of potential misalignment from the decal printer. Printing presses print every color separately and it's quite a hassle to align all the different colours. By splitting decals this way the printers shift responsibility for perfect alignment to the modeller instead of themselves. 😉 But seriously, I'd rather center those red dots myself than have to look at a botched decal coming off a sheet.
1 31 December 2024, 15:48
David H SchrijverHadn't looked at it that way. I seen too many unusable decals because of misalignment so maybe I should think good idea.. that said the revell tricolour rounded I have are perfect 😉 thinking about it, if the blue and white aren't centred , as long as the overlap is enough it won't make any difference. I can see the third colour has to be spot on or issues arise 👍🏻
2 31 December 2024, 17:53
December 13, 2024
David Hheeft een nieuw fotoalbum toegevoegd.
18 afbeeldingen
F104c “snoopy sniper”
1:48
Surprisingly I was expecting the master pitot to be a drop in fit but no. You have to fit the kit plastic pitot, cut it ...
Project: Snoopy Put that gun down !
Scratchbuilt
Alle reacties (19) » 40 1 March 2024, 18:11
David H SchrijverCheers mr D and Michael. The reason I put them both in the one build is that they are both the same airframe just at different points in their careers.
13 December 2024, 18:34
December 2, 2024
November 28, 2024
David Hheeft een nieuw fotoalbum toegevoegd.
7 afbeeldingen
VMFA-212 Lancers
1:48
Wrong stabs , all that raised detail will have to go and I’ll have to create a slotted edge somehow. ps, it’s not really...
Project: F4j VMFA 212 Lancers
1 22 November 2024, 08:57
David H SchrijverThis kit was bought as " believed complete" from eBay. What it actually is complete but with reservations. Incorrect stabs, they're from and fg1 boxing ( wished I'd known BEFORE doing the FAA rebuild ) . So they're first to be fixed before going any further.
This entails sanding off all the raised detail and creating the slotted leading edge. Let's see how that goes .
22 November 2024, 09:03
David HBeautifully printed sheet of a hard to find subject. Unfortunately Microscale have made some glaringly large (pun intended) errors.
First up are the stars and bars. These are way too large. More 1/32 than 1/48. In fact they are larger than those on the Hasegawa 1/32 skyhawk. In addition, on my sheet the blue looks a little to light in shade
Secondly , the “MARINES” text is too large and the wrong font.
On the plus side, the carrier is minimal and the printing is perfectly in register.
My Opinion:
Only worth buying if “MUST” have this airframe or if you have plenty of spares to replace the glaring errors. But if you do , it will result in a model in rarely seen livery
28 November 2024, 11:31
David His eigenaar van dit item
22 November 2024, 08:45
David H SchrijverGreat printing but the "MARINES" font is totally wrong and the stars and bars are the same size as my 1/32 skyhawk 🤣 so also unusable. I got these dirt cheap (now I know why) . So basically don't waste your money unless you have plentiful spare decals (fortunately I do ).
28 November 2024, 11:17
November 21, 2024
November 8, 2024
October 27, 2024
October 22, 2024
October 14, 2024
David Hheeft een nieuw fotoalbum toegevoegd.
Alle reacties (58) » 50 30 October 2021, 18:20
Andreas LuxThis effect of paint is definitely annoying, but that doesn't detract from the great result of your work!
14 October 2024, 18:35
September 8, 2024
May 27, 2024
April 20, 2024
David Hheeft een nieuw fotoalbum toegevoegd.
17 afbeeldingen
Three Little Birds
1:72
First up the monogram cockpit, with the bottom half of the seats moulded in but some nice detail on the consoles as well...
Project: Three Little Birds
Alle reacties (10) » 15 6 November 2023, 22:14
David H SchrijverSo this has stalled a little bit , due to 1.my errors (wrecked the port stabilator and had to scratch a new one , 2 lost bits and pieces (lost 1 of the the flaps, now thankfully turned up) 3.other projects.;4. A change of plan.
I'm taking photos as I go but will post them when all 3 birds are finished to give a better "side by side" comparison
Thankyou to all of still following this 👍🏻
20 April 2024, 10:26
April 5, 2024
wnolder.php?lang=nl
2024-04-05 21:37:02
2021-08-17 21:45:47
103074
/ajax/wnolder.php?lang=nl&sd=2024-04-05 21:37:02&md=2021-08-17 21:45:47&filter=&w=103074
todo