Perete
Wall
March 3, 2025
John BallmanThis conversion set is not well cast, If Cutting Edge / Meteor Productions is 3rd generation, I consider this to be 2nd generation casting. It provides a injection molded Canopy, straight from the Hasegawa kit, Attic probably ordered these back when HOBICO was a US source for Hasegawa parts. The decals are printed on standard decal sheet for a ink-jet printer, not super quality. Directions are in paper and a CD rom is provided.
The kit requires a donor kit, a 1/32 Hasegawa F-16A/C would be your best starting point. The resin fuselage is split top and bottom halves, just like the Hasegawa kit, however my parts where extremely warped and or broken upon arrival to Casa La Ballman. Using those parts as I guide, I tried to use the 1/32 ACE F-16XL kit and the 1/32 F-16A/C kit to provide the parts to stretch the fuselage. Although it is a copy of the Hasegawa kit, it is not as dimensionally correct with this conversion. So, the parts didn't match up as well as I intended. Not sure if I was the problem or not. I ended up trashing what I had accomplished including all the ACE parts. I kept all the Hasegawa parts like intakes and landing gear, tails, exhausts for the time I circle back to this project.
Next time I revisit this project I will be using two Hasegawa kits for donors. So far, I've been able to get those on Ebay for decent prices below $50.00. There are prices on Ebay that are ridiculous (over $100.00) for a kit whose tooling is over forty years old. I'm also looking at getting individual fuselage parts from the Academy kit on Ebay. These may be a better alternative to the Hasegawa kits. There are Sellers that just sell parts or sprue trees for a less expensive way of getting replacement parts. It would be a way to do a two-seater if you want with that option. Your mileage may vary.
1 3 March, 01:01
February 28, 2025
February 24, 2025
February 14, 2025
February 3, 2025
January 21, 2025
phbio83@John BallmanHello, do you have this decals still ? what is the shipping cost to France ? thank you. regards
P-47: High Cover, Slick Chick, Raid Hot Mama, Chickenbones
Zotz Decals 1:32
32040 20 January, 12:26
John Ballman AutorThanks for showing interest. This Decal sheet is complete and in excellent condition.
I use Pirate Ship for USA and International. I will accept MO or Cashiers Checks, Paypal for US ONLY, ALL INTERNATIONAL PAYPAL. My shipping services needs your email so you get shipping alerts and tracking for delivery assured.
My email/Paypal is john_ballman@att.net
For a shipping quote, please correspond via my email your address information.
Respectfully,
JB
20 January, 23:35
January 5, 2025
December 19, 2024
December 7, 2024
September 28, 2024
September 27, 2024
September 7, 2024
August 8, 2024
John Ballmana adăugat un nou photoalbum.
8 9 September 2023, 22:09
John Ballman AutorBack to the Bench. Sprayed Future for the application of washes for 30.5cm Howitzer. Using the Tamiya pre-made washes for the first time. They are convenient, mineral spirits based so it has to be applied over an acrylic gloss coat. I started with the black and some gray, put some rusty brown on it. Looking a little better in places.
11 September 2023, 16:06
July 11, 2024
July 3, 2024
June 13, 2024
May 31, 2024
May 16, 2024
John Ballmana marcat acest articol drept comercializabil / vândut
USS Arthur W. Radford DD-968 w/ Advanced Enclosed Mast/Sensor System - Dragon
Dragon 1:350
1018 2004 Piese noi 16 May 2024, 05:52
May 3, 2024
April 19, 2024
wnolder.php?lang=ro
2024-04-19 03:27:25
2018-07-18 15:33:21
41413
/ajax/wnolder.php?lang=ro&sd=2024-04-19 03:27:25&md=2018-07-18 15:33:21&filter=&w=41413
todo