Airviper 0.2 Airbrush
Ammo by Mig Jimenez | No. AMIG-8624

fakty
- značka:
- Ammo by Mig Jimenez
- nadpis:
- Airviper 0.2 Airbrush
- číslo:
- AMIG-8624
- mierka:
- No
- typ:
- náradie
- Čiarový kód:
- 8432074086246 (EAN)
- téma:
- Airbrushes » maľba (Nádoby)
Marketplace
Internetové obchody

USD 159.76


USD 170.83


AUD 234.95


€ 137.50


€ 139.15


USD 119.99


zł 547.55

Alternatívne SKU pre Ammo by Mig Jimenez AMIG-8624:
A.MIG-8624 | 8432074086246 | AMIG8624 | EXPO-MIG8624 | 8624 | A.MIG8624
Poznámka: Ceny a dostupnosť sú iba orientačné. Skontrolujte tiež, či sa produkt skutočne zhoduje!
Recenzie v krabici
Externé recenzie
Nevieme o tom žiadne recenzie v tejto schránke Airviper 0.2 Airbrush (#AMIG-8624) z Ammo by Mig Jimenez.
Komentáre

I've been disapointed with this airbrush : found some issue on mine > the needle protrudes too far forward the head while assembled, the spray of paint is low to go out and imprecise.
It's a strange anomaly which I am going to report to the manufacturer.
Všetky komentáre (7) » 15 September 2022, 14:06

Hi Roger,
Coming back.
Thanks for your informations !
Good for you, you 're going on the right way with it. I' m happy yours correctly works.
As you certainly know, Ammomig airbrushes are made by Badger company (USA).
I like their airbrushes while they are not the best ones on the market because of some issues when unboxing them : Yes, I have had some problem with my Aircobra five years ago when discovering it : needle and nozzle parts were too strong fitted, the oil on parts was sticky, the airbrush unable to use.
As you, I had to clean it entirely (except valve air inlet), I damp the parts in petroleum solution then lubrificating them and re mounting... but today it works perfectly, and I never change its needle nor nozzle.
And again as you say, far better than several Chinese Sh... I bought during the 10 last years.
So a very good airbrush, an all-round one (priming, coating, details, varnishing) ; I love it.
Unfortunately, I did not meet the same success with my Airviper.
I made several tests on the last days and it still refuse to work. disassembling, re-assembling, cleaning, greasing, fitting a new nozzle...
Nothing blow out from it. Incomprehensible.
I'm sure the airbrush body is Ok. The issue certainly comes from the nozzle / nozzle cap junction ; I have now bubble in the cup when using it.
The only thing i haven't tried yet is changing the needle, because mine seems to be in good condition.
I would have to buy a new complete kit (nozzle + needle + nozzle cap guard), but because I 'm afraid of loosing money I hesitate !
Please let me know about your next experiences with it, I appreciate.
On my part I'll let you know if I fix the problem.
Best regards
24 March 2023, 15:13
Referenčný materiál

Airbrushing Techniques: Getting Started DVD Learn to airbrush start to finish
Aaron Skinner
2018 Digitálne Všetky knihy » (14 spolu)