databáza modelovania v mierke | správca skrýše

A-6 "Intruder" , EA-6 "Prowler" wheels set

ResKit | No. RS32-0001 | 1:32

Boxart A-6 "Intruder" , EA-6 "Prowler" wheels set RS32-0001 ResKit

fakty

značka:
ResKit
nadpis:
A-6 "Intruder" , EA-6 "Prowler" wheels set
číslo:
RS32-0001
mierka:
1:32
typ:
Podrobnosti sú nastavené
uvoľnený:
2020 Nový nástroj
Čiarový kód:
4589913295353 (EAN)
téma:
Grumman A-6 Intruder » Jets (lietadlo)

Navrhnutý pre

Táto sada náhradných dielov je navrhnutá pre:

 
Trumpeter

Marketplace

Internetové obchody
Logo Plastic Models Store
USD 14.99
UASkladom »
Logo Squadron Hobbies
USD 17.24
USSkladom »
Logo Sprue Brothers Models
USD 17.99
USSkladom »
Logo Super-Hobby.com
USD 18.71
PLSkladom »
Logo Plastmodel
zł 59.59
PL USD 16.51Skladom »
Logo Hobby.dn.ua
€ 14.68
UA USD 17.37k dispozícii »
Logo the48ers.com
€ 12.92
CY USD 15.29Vypredané »
Logo Der Sockelshop
€ 15.18
DE USD 17.96Vypredané »
Logo HobbyLink Japan
¥ 1836
JP USD 15.24Vypredané »

Alternatívne SKU pre ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001

Poznámka: Ceny a dostupnosť sú iba orientačné. Skontrolujte tiež, či sa produkt skutočne zhoduje!

Recenzie v krabici

Externé recenzie

Nevieme o tom žiadne recenzie v tejto schránke A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) z ResKit.

Komentáre

Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.
Všetky komentáre (10) » 1 19 April 2021, 15:43
Jon Somerville autor
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.
 19 December 2023, 13:44
Jon Somerville autor
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.
 25 January 2024, 17:38

Referenčný materiál

Grumman A-6 Intruder & EA-6B Prowler (Guideline Publications 146)
Grumman A-6 Intruder & EA-6B Prowler
Warpaint No. 146
Andy Evans
2025
Grumman A-6 Intruder (Phoenix Scale Publications 18)
Grumman A-6 Intruder Airmark In Profile & In Scale
Modellers Airguide No. 18
Andy Evans
2024

Všetky knihy » (29 spolu) Všetky prehliadky » (15 spolu)