p 36

Photo 1 of 6

Komentáre

2 February 2016, 20:16

arne vd burg autor
My first try on a natural metal finish😮
I made every beginner's mistake possible on this model ,so learned allot .
The next 1 would be better i guess .
The kit is from academy 1/48 scale .(Thx Erik and Martien for providing me this 1 👍).
I used alclad polished aluminium on the alclad gloss black base.

2 February 2016, 20:30

Choppa Nutta
very effective !

2 February 2016, 20:38

arne vd burg autor
Thank you Choppa

2 February 2016, 20:46

Erik Leijdens
Still a very neat looking Hawk Arne, couldn't have done it any better! My first NMF kit is still to come..

2 February 2016, 21:01

Choppa Nutta
yeah mine to Erik ... 🙂

2 February 2016, 21:11

Hanno Kleinecke
Good job on your NMF Erik !

2 February 2016, 21:21

Erik Leijdens
It's not mine Hanno 😄

2 February 2016, 21:26

Hanno Kleinecke
Oops I see 😄 ! Arne's NMF of course, sorry !

2 February 2016, 21:30

Eelco Gregoire
Deze heeft echt een mooie "look" door de Alclad hoor!

2 February 2016, 22:04

arne vd burg autor
Thanks guys
One of the problems i had is that i pulled off a some pieces of decals with masking tape . I used the same tape like i always do, protected the decal with a layer of future . Now i wonder if decals got less adhesion on a metal paint. Any tips tricks and aswers are more then welcome. 😄

3 February 2016, 18:11

Choppa Nutta
more layers of Future and more curing time perhaps ?
I know some use Tamiya Extra Thin to really suck the decal down to the surface...

3 February 2016, 18:45

arne vd burg autor
Tamiya extra tin on decals sounds tricky. Thx choppa

3 February 2016, 20:34

Choppa Nutta
yeah needs care but apparently if you don't use too much it's safe enough, something i want to try next time I decal 🙂

3 February 2016, 20:39