BAe Hawk Mk66 U-1251 Swiss Air Force

1
April 29, 2018
Start of the new project, something simple, out of the box 🙂 The cockpit of this Italeri Kit is rather simple
2
April 29, 2018
The first layer of primer
3
April 29, 2018
The cockpit leaves me rather helpless than smiling, hmmm... Looked for a Wolfpack replacement, I hope I'll get it this week, I'm curious how the difference will be.
4
April 29, 2018
I got the kit for about the half retail price. And this is what it is worth for me, tbh. The big secret for me is how the T-Rebox can cost even twice the price of the Italeri...
5
June 8, 2018
Next attempt, the Wolfpack cockpit is ready so far
6
June 8, 2018
Not perfect, but a lot better.
7
June 8, 2018
I think this is OK for now 🙂
8
June 17, 2018
No inner life. So I had to add some parts...
9
June 17, 2018
... to avoid looking into an empty fuselage
10
June 17, 2018
Cockpit coverage was trimmed to fit in place...
11
June 17, 2018
... and painted black
12
June 17, 2018
Some black paint inside the fuselage added to give a bit of depth
13
June 17, 2018
looks not too bad 🙂
14
July 17, 2018
Fill the wing from the back...
15
July 17, 2018
Since the "Red Arrow" kit contains just one visor in a very simple shape, I had to build them scratch.
16
July 17, 2018
Ready to mount them on the glare shields ...
17
July 17, 2018
... and done
18
July 17, 2018
Slowly she comes to my taste.
19
October 14, 2018
Primer and Pre-Shade
20
October 14, 2018
The first white on the bottom...
21
October 14, 2018
...on the tail...
22
October 14, 2018
...and all over.
23
October 14, 2018
It will be necessary to fix some minor color inconsitencies
24
October 14, 2018
All in all, I like how she evolves 🙂
25
January 13, 2019
Registration airbrushed
26
January 13, 2019
Washed panellines on the belly ...
27
January 13, 2019
... and on the top
28
January 13, 2019
29
January 13, 2019
Magnetic gun-pod added
30
January 13, 2019
the fuselage is almost finished...
31
January 13, 2019
...some minor...
32
January 13, 2019
... touch-ups will be necessary.
33
January 19, 2019
Some work on the canopy: Started to scrape out the moulded detonation cords
34
January 19, 2019
sanded
35
January 19, 2019
and polished.
36
January 19, 2019
Preparing the vinyl cords from Matterhorn Circle (Robi, you did a fantastic job!)
37
January 19, 2019
The front cord is in, the rear is still on the masking tape
38
January 19, 2019
This is how they look pre-cut on on the film
39
January 19, 2019
and this is how they look on the canopy. Not a quickie, but worth the effort.
40
March 2, 2019
So here she is...
41
March 2, 2019
...I consider her finished
42
March 2, 2019
The canopy did not come out as desired,
43
March 2, 2019
but ok
44
March 2, 2019
All in all, it was good fun to build her
45
March 2, 2019
in a rather unusual color scheme.

Komentáre

29 April 2018, 16:04 - Súkromná správa

Thomas Bischoff
A swiss Hawk! - I'll take a seat and enjoy the show

29 April 2018, 20:21

Thomas T autor
Thomas, maybe you want to wait for the Wolfpack seat, is might be a bit more comfortable 😉

29 April 2018, 20:31

Melgg Lütschg
I'm curious. If you take the MC decals and the Wolfpack Set, it will be a beauty😉

30 April 2018, 09:07

Thomas Bischoff
Cockpit looks good - much better than the kit part

10 June 2018, 08:10

Thomas Bischoff
cool - more pic's! 👍 👍 👍

18 June 2018, 18:18

Dave Flitton
Nice start!! Looking good

18 June 2018, 18:27

Patrick Hagelstein
Doesn't look too bad at all! 😉

18 June 2018, 18:33

Gordon Sørensen
Nice looking cockpit, Thomas. That is moulded in a bright red!

18 June 2018, 20:12

Thomas T autor
Chaps, thanks a lot for your nice comments.
Gordon: yes the bright red is a kind of a challenge, I am pretty sure she will not have the common SAF livery (the red-white one everybeody puts on their Mk66 Hawk).
Dave, Patrick: the IPs are cut out from the PE parts from the kit, I guess it is nicer than the WP resin IPs. I know I am a slow builder, still a lot of work in the kit until now.
Thomas: I hope the next couple of weeks give me more chance to crawl under my stone (aka go to my hobby room 😉 ) to gain a bit more progress. And shoot more pix.

18 June 2018, 21:27

Spanjaard
excellent looking cokpit... those visors are really good!

17 July 2018, 20:59

Thomas Bischoff
👍 👍 👍

14 October 2018, 18:29

Thomas T autor
Hans, according to the information I have, the livery lived just a couple of days, she was then re-painted to the commonly seen scheme (red, gray and black). Since I prefer to have my planes in liveries not always seen, this was an easy choice 🙂

13 January 2019, 11:30

basket
Very nice !

13 January 2019, 20:45

Spanjaard
good choice

16 January 2019, 20:00

Thomas T autor
Thank you all for your comments, they are appreciated!

19 January 2019, 22:25

Jos Jansen
Tidy built Thomas...👍

21 January 2019, 10:54

Thomas T autor
Thank you, Jos!

21 January 2019, 19:18

Marco Gallmann
Thomas, the Hawk looks very nice. Which color did you use for the red part?

21 January 2019, 19:28

Thomas T autor
Hi Marco.
This is the standard Tamiya Acrylic X7 / XF7, I have seen it is pretty close to the RAL 3020. The white crosses are masked out, the masks are included with the Matterhorn decals 🙂

21 January 2019, 19:36

Marco Gallmann
Thanks Thomas. I always have problems to reach a rich red, I think I have to try this one from tamiya too. Matterhorn decals are one of my next purchase😉

21 January 2019, 20:09

Thomas T autor
Matterhorn Decals are a very good choice. I guess they invest a lot of time into historical research to have them printed correctly.
And the rich red should be no problem if you apply over a yellow or a white base. However, Tamiya colors are my preferred ones anyway, besides the Gunze Aqueous 🙂

22 January 2019, 06:01

Augie
Oh wow, that looks so perfect.

2 March 2019, 17:39

Stephan Ryll
Stunning result 👍

2 March 2019, 18:07

Neuling
Very beautiful! Very Swiss!

2 March 2019, 18:29

David Taylor
awsome

2 March 2019, 18:34

Thomas Bischoff
Cool! Looks awesome 👍 👍 👍

2 March 2019, 18:54

Melgg Lütschg
Fantastic result Thomas! I wish I am 1:48 so I could take a seat in the cockpit 🙂

3 March 2019, 08:35

Thomas T autor
Thanks a lot for your kind comments.

3 March 2019, 13:51

Spanjaard
Very nicely done

3 March 2019, 16:12

Nathan Dempsey
Well done kit. Looks great in Swiss markings.

3 March 2019, 16:24

Thomas T autor
Nathan,
this was a short term Swiss marking. It was used for the transfer from UK to Switzerland. After a couple of days it was modified to the regular livery, which looks like the UK and the Finnish one, I guess there are some more Air Forces using it. This white one is much more appealing (at least to my taste). I found just two pictures plus the profile from Matterhorn Circle, there will be little proof that I did something wrong
Thanks for your comment, also to Spanjaard!

3 March 2019, 18:05

Michael Kuenzle
Very nice build - good to see one in different markings.

15 March 2019, 21:59

Mirko Römer
The swiss were sold to Finland. I hope you keep it, looks fantastic!

15 March 2019, 22:11

Clifford Keesler
Very nice Hawk.

16 March 2019, 02:17

Thomas T autor
Thank you both. @Mirko: The real U-1251 found ca cozy place after retirement in the F&F Museum in Dübendorf (near Zurich). This one was not sold to Finland, and since I like those colorful models in my display, there is no reason to get rid of it 😄

16 March 2019, 11:47

John Thomas
Very nice

16 March 2019, 14:31

Nigel
Wise choice on the colour scheme, Thomas. Very nicely done, and very arresting compared to the alternatives!😉

8 May 2019, 06:29

Treehugger
Nice work on the big canopy clear part. When I look at sprue parts for this type of model in kits, the big canopy part always looks weird to me, as if the framing is molded wrong. Maybe I am imagining that, but somehow that one part always looks weird to me when looking at model kits of this jet.

8 May 2019, 06:44

Michael Phillips
Wow, I missed this one Thomas! Fantastic work as usual my friend! That paint is immaculate! Simply perfect...

8 May 2019, 15:03

Thomas T autor
Thanks for your kind words, they make me a bit shy.
@Nigel: My aim is to have alternative color schemes im my collection, moreover I prefer this scheme to the standard. 'Föifer und Weggli' situation (sorry, Swiss German saying) 😛
@Treehugger: The shape of the moulded cord is basically correct, compared to the original the look in the sprue part is a bit strange, I agree. On the other hand, the vynil cords are a bit too prominent, however, I prefer that over the standard look. Additionally it is a challenge to place the vynil cords into the canopy.
@Michael: By far not perfect, however I can see progress in my work 🙂

8 May 2019, 18:56