时间线
Wall
February 21, 2025
February 20, 2025
Andrea Brenco添加了一个新相册
所有评论 (46) » 74 26 November 2024, 22:20
Andrea Brenco 作者Thanks a lot to everyone for the kind comment, much appreciated!!!
@David R. Meizoso luckily, I found some figures from Glowel Niniatures that have the right poses, even if they are German Luftwaffe Personnel... but nobody will know it!!! They are 3D printed, great natural poses but low resolution prints, lots of lines and recesses too much noticeable IMHO, May be next time will give a liquid surfacer coat first, then painting....
@Łukasz Gliński well... all flat surface looks the same... 🙂)
1 20 February, 22:02
February 4, 2025
January 29, 2025
January 26, 2025
January 25, 2025
Andrea Brenco添加了一个新相册
所有评论 (19) » 45 25 July 2024, 20:44
Andrea Brenco 作者Thanks again for your appreciations!
@Skyhiker Germany captured at least three flyable Jugs, this is one of them, the well known P-47D-2-RA landed by mistake in Caen on the 7 November 1943: after a period of test in Rechlin and a part in a propaganda film, it was handed over to Zirkus Rosarius that toured Lufwaffe's front line unit instructing fighter pilots on characteristics of various enemy aircrafts.
21 September 2024, 20:29
Andrea Brenco添加了一个新相册
所有评论 (15) » 53 28 October 2024, 22:57
Andrea Brenco 作者@Trez : I think you are referring to photo #6. It is the MicroScale Micro Mask, a liquid mask medium. It is useful in most occasions, can be applied with a toothpick or a brush, can be cleaned with water but you cannot paint with water based paint on it, obviously.
I have the Tamiya equivalent too, it is of a greener color but works in the same way, maybe it is a little denser.
I used the blue MicroMask for the tail and rudder camouflage, and to fill the space between the masking tape in the checker band.
HTH
1 25 January, 21:09
January 21, 2025
Andrea Brenco添加了一个新相册
所有评论 (8) » 21 10 January, 16:03
Andrea Brenco 作者Thanks Neil, yes I agree with you, I think that this Fiat is the best looking Serie 5 fighter, and I hope to have the time to do the splinter RSI Capt. Drago scheme...
P.s. my bench usually is not this tidy... 😉
1 14 January, 18:12
January 4, 2025
December 13, 2024
December 3, 2024
Andrea Brenco添加了一个新相册
21 10 October 2024, 11:32
Andrea Brenco 作者Thanks guys! the stand is a customer idea and realization, and I think he did an excellent job!!!
3 December 2024, 15:40
November 30, 2024
November 29, 2024
November 17, 2024
Andrea Brencotonight I cannot upload images to my album or project covers, upload failed every time or system cannot copy the image for the cover.
I t is happening to somebody else?
Thanks
I t is happening to somebody else?
Thanks
1 17 November 2024, 21:49
Nathan DempseyYes. I just tried to update my Mirage 2000 build and the image failed multiple times.
17 November 2024, 22:08
Andrea Brenco 作者Thanks for your answer, at least it is reassuring to know that doesn't depend to my PC...
17 November 2024, 22:23
November 15, 2024
Andrea Brenco添加了一个新相册
所有评论 (36) » 70 31 May 2023, 15:48
Andrea Brenco 作者I'm terribly sorry for the late response!!!
Thank you a lot to all of you who took the time for your appreciation to my little model!!
@Neil: we will have the G in November, Eduard will have me go broken....
5 October 2023, 21:08
Andrea Brenco添加了一个新相册
所有评论 (7) » 29 15 September 2024, 09:45
Andrea Brenco 作者I deeply apologize for the very long delay in replying! Thank you all so much for your comments!!!
15 November 2024, 22:13
November 13, 2024
November 9, 2024
November 6, 2024
November 1, 2024
October 30, 2024
October 27, 2024
Andrea Brenco添加了一个新相册
21 25 October 2024, 16:03
Andrea Brenco 作者Thanks a lot guys! I only wish I could find more time to finish all that Pheon decal sheet.... and a few other as well.... 🙂
27 October 2024, 20:03
October 25, 2024
October 17, 2024
Andrea Brenco添加了一个新相册
所有评论 (72) » 71 3 May 2021, 15:37
S MExcellent model! I remember this thread introduced the use of markers for modelling and it has been a great help 😄 👍
17 October 2024, 18:53
Andrea Brenco 作者Thanks a lot for all your kind comments! I'm glad I could be of help
17 October 2024, 20:32
Andrea Brenco添加了一个新相册
所有评论 (23) » 58 13 April 2023, 10:52
Andrea Brenco 作者...and OTTO is gone to France too, to rejoice with Kirschstein's "optische Täuschung"!!!
4 March 2024, 22:43
October 4, 2024
September 22, 2024
September 20, 2024
September 15, 2024
Andrea Brenco添加了一个新相册
7 20 January 2020, 01:09
Alessandro PettinacciI've also tackled this very aircraft with a more recent boxing of this kit. I'd love to see how yours would come out!
15 September 2024, 09:57
Andrea Brenco 作者Thanks Alessandro! so many kits and projects, so little time... Hope to start one of these soon!
P.s. I have seen your build, nice model!!!
15 September 2024, 10:34
Alessandro PettinacciThank you! a shame i really can't manage to get some decent photograpy going, but alas, i will manage. Have a nice day mate!
15 September 2024, 14:04
September 5, 2024
August 18, 2024
July 31, 2024
July 27, 2024
July 19, 2024
July 17, 2024
Andrea Brenco添加了一个新相册
所有评论 (11) » 51 15 January 2024, 21:00
Andrea Brenco 作者Thank you very much Rui and Lukasz, and to Juergen too!
@Juergen Klinglhuber: I use Tamiya Extra Thin when I have to glue it to plastic (typically inside an hole) and CA to other surface or when I need a permanent fix in case I have to use again Tamiya ET over it (sometimes I glue rigging to the struts and then to the wing)
@ Oleg Bogolei: Ithink AK sell it too with their brand on it
15 July 2024, 15:56
Juergen Klinglhuberthank you - never thought about Tamiya extra thin,...will try that too
17 July 2024, 08:55
July 12, 2024
Andrea Brenco添加了一个新相册
41 图片
Reggiane 2005 commission build
1:72
Finished! RS model is a good short run kit, needs only some reverse engineering to bring the plastic parts to the origin...
所有评论 (18) » 43 29 March 2024, 00:26
Andrea Brenco 作者Thanks a lot to everybody, I am really glad you like it! Compared to a 109 is really a bigger airframe, it doesn't seem at first sight!
12 July 2024, 17:05
July 10, 2024
July 7, 2024
July 3, 2024
Andrea Brenco添加了一个新相册
所有评论 (52) » 72 8 February 2022, 18:55
Andrea Brenco 作者You are right Trez, I checked the D-11 boxing and in the instruction there is the same mistake.
Let's see the bright side of this: the plastic parts are correct and all the needed one on the sprues, it is only a problem due probably of a "copy and paste" done by the graphic guys...
But I am very happy you pointed it out because I will probably not notice in the building process, thank you very much!
2 July 2024, 22:34
Transall NG@ Trez Mackenzie
You are right on every points !
A Ta-152 would be a bestseller without any doubt !
Sadly, their website isn't running perfectly, at least for me, and Kaspersky doesn't like it at all !! 🙁
3 July 2024, 14:54
June 24, 2024
June 17, 2024
June 13, 2024
Andrea Brenco添加了一个新相册
所有评论 (21) » 49 23 December 2023, 23:27
Andrea Brenco 作者Thanks a lot to everybody, I really appreciate all your comments!
13 June 2024, 20:14
May 29, 2024
Andrea Brenco添加了一个新相册
所有评论 (17) » 50 15 January 2024, 21:08
Andrea Brenco 作者Thanks a lot Thomas, Bernd, William and Pietro!
@William: this time I used Eduard's decal and it fits! I did just some minor touch ups with a fine brush. Other times instead I had to mask and paint... HTH
29 May 2024, 09:41
May 22, 2024
May 12, 2024
Andrea Brenco添加了一个新相册
所有评论 (27) » 62 7 March 2024, 00:28
Andrea Brenco 作者Thanks a lot to all who takes the time to leave a comment or a like, I am really honoured!
11 May 2024, 21:01
April 20, 2024
Andrea Brenco添加了一个新相册
13 18 April 2024, 09:02
Andrea Brenco 作者Thanks Neuling and Mr. Jameit has been a fun build regarding airbrushing, but fit between wings parts and then fuselage wasn't that great, it seems that AZ moulds are getting some wear in some points ... or I am spoiled by the recent Eduard's releases...
20 April 2024, 07:53
April 4, 2024
April 2, 2024
March 29, 2024
March 28, 2024
wnolder.php?lang=zh
2024-03-28 11:57:40
2016-02-27 17:28:30
24057
/ajax/wnolder.php?lang=zh&sd=2024-03-28 11:57:40&md=2016-02-27 17:28:30&filter=&w=24057
todo