ウォール

Steven Van Dyck 著者
It was a rowdy start with the left part of the frame warped. I removed the warp with a thread tended between the wheelbays. Some changes were done to the interior to place the PE parts. A lot of parts are still dry-fit until after painting everything black. A strange thing is the gauge decal that has to be reversed from the sheet.

DerMattes
Watching 👍

Yngve N
I'm here to learn

István Szücs
Looks great, I'm in!

Steven Van Dyck 著者
Both ship hulls are now painted using Gunze H 333 as base, Taniya NATO black as dark tone and a drop of white to tone down. For the hull red is used Gunze russet, Tamiya dark brown and Gunze H 7. The deck is painted NATO brown to eliminate the wood grain and then Vallejo light sand primer was applied until it was tan again. The two planes I have left got the wings clipped and plied back. A lot of components were unmounted to get the planes into the hangar.

Steven Van Dyck 著者
The wood decks are fixed with an extra glue layer under the sticker. The boat rails of Strasbourg were a lot of work for something you wont see appearing through the thick wood deck. They have to be applied perfectly along the etchlines but they don't protrude far enough through the deck to show that they are placed on spacers. But I guess the kit rails wouldn't even have appeared at all. In Dunkerque there was no PE for the rails, but there is a transparent film showing up through the slits. I also painted the foredeck and th superstructure decks in Gunze H54 Deck Blue. This will now have to be masked for the final camo paint.

S M
Awesome! Very lively scene and those pine cone trees are clever! 😄 👍👍👍 This could fit in a museum!

Steven Van Dyck 著者
Thanks for the likes and acclaim. The one missing tree is now added, the cows got copper thread leashes and the dio will feature in the IPMS Antwerp contest in a few weeks. I'lll make a picture there of the result.

Ben M
👁️👁️

Steven Van Dyck 著者
The wheels are prepared, it's a full day of sanding the sprocket teeth and road wheel surfaces. The cabin appears to be white, though that is not mentioned in the instructions. I Ieft the seats as a dry-fit. The cabin bottom needs to be competely trimmed, this is not sufficiently done in production.

Steven Van Dyck 著者
The first building step contains an error. The number of road wheels to be prepared is supposed to be 12, but the s300v got 14 of them. So don't thrash the sprues yet, there are enough of them for 15 wheels.

[img1]

[img1]

Steven Van Dyck 著者
The cabin details are now painted and it is closed up. Some decals for instruments are included but not all of them, it seems. I painted some instruments on myself. I also applied 3 meshes on the engine compartiment.

Rui S
Beautiful truck 👍

Steven Van Dyck 著者
Thanks, Rui. Now the figures are finished, but one lost an arm while being glued in to the truck. He'll have to be painted inside the cab now. The cargo containers are weathered and the pallet lift will roll over a spare anti-skid plate from the kit.

Steven Van Dyck 著者
After a long hibernation Rex is getting hungry again. The colors for the M1070 project also determined the triceratops' camo.

Ben M
Paint looks great so far!

Steven Van Dyck 著者
That was the first time they moved to a better location. It also has an impressive end ceremony in an auditorium.

George Williams
Thank you very much for taking the time to post these pictures.

Lorraine Lin
Congratulations! and thank you for the sharing

Neuling
Thanks for sharing!

Steven Van Dyck 著者
The Magic Models gun is now assembled. A new attempt is made to get the drive train movable.

André Silva
Insane amount of work and detail (in a good way). Following.

Steven Van Dyck 著者
This kit is beautifully textured with wood nerves and has an ingenious fitting with most of the seams on the inside of the wheels. Unfortunately the sturdy build can't prevent the mechanism from skipping its cogs over the cumbersome jacking movements, caused by the friction in the wheels. That might be exacerbated by me gluing the kit together in stead of only using the plugs. The remedy was to add a roundel to the spindle. I have to remake my video as it was not completely sharp.

Steven Van Dyck 著者
The video shows the action of the crane.

Youtube Video

Steven Van Dyck 著者
Thanks, I now tried out the Voyager PE for the launcher that was designed for the Dragon MLRS. It's not very much off for this kit. It might be a bit overkill for the detailed Trumpeter rocket loader parts, but like this the four large profiles are not split on the seams. I might transfer parts of the kit launcher to the PE parts, like the loading hooks that seem crudely done in this old Voyaver design. Because of the embossing at the top plate you get some deformation.

Steven Van Dyck 著者
The launcher for MLRS is now built. It's an easy construction, if you don't take into account the changes I did to the rocket tube assembly. You have to choose if you remove the locks or not, because if they remain you can't move the launcher from stowed to elevated position. A thing you sadly can't perform with it, is rolling out the telescopic arms, so a new tube rack can't be loaded without scratching. The old Dragon MLRS could do that. But all operational angles of the launcher can be achieved if you fix the elevation cylinder, that is workable, and the turntable that allows for removal of the launcher. Now I'm stuck with that incorrect cabin design, so until I figure out how to solve that, it will be M1070 in the next updates.

Steven Van Dyck 著者
I found this old seventies Otaki CVN-65 Enterprise kit, but to upgrade it to modern standards there are some challenges. It didn't have the airwing but I found somebody willing to part with a dedicated Arii set for it. I will be receiving it in march 2023. There is also no PE for this kit, so at first I was happy to encounter an interesting eBay bid and mail the 1/350 basic GMM Taniya set for only 18 euros. Sadly this is made for a post-overhaul Enterprise with the new island design, so it's not very useful for my kit. Then I contacted Revell Germany and they were willing to sell me the 1/400 PE set designed for the Aurora Enterprise they reboxed with it as a premium kit. Though not completely fitting, this will very much improve the model. Another coincidence is the 2022 edition of new L'Arsenal F-14 fighters on many scales, and they had 1/400. So I ordered 10 of these and made a Scalemates product page for this, somebody else is going to have to add the other scales... Things to look out for are crewmembers and maybe some decals, because in the kit these are just stickers.

Steven Van Dyck 著者
Many other types of airplanes were added today. It was also announced that some decal sets would be produced by L'Arsenal later this year.shipmodels.info/mws_..hp?f=16&t=377091

Steven Van Dyck 著者
I added the helicopters, fire trucks and the Navy personnel. Thanks to L'Arsenal to send me an extra pack of regular positioned personnel x80!

Steven Van Dyck 著者
An order is placed with L'Arsenal to print the 1/350 Enterprise resin hangar parts for Tamiya in 1/400. These should fit with some adaptations in the Otaki hull. The main problem is that Tamiya made their model as a box with both front starboard elevators in line. My model should be better with a curve in the hull and an angle in the elevators. They would also provide decals in 1/400 but I will have to scratch the PE parts.

Steven Van Dyck 著者
Academy's Da Vinci Catapult can be built within a day without any glue (though I use it where no pins are placed). It can shoot 3 balls a distance of a few metres.

Steven Van Dyck 著者
Youtube Video

Youtube Video

Steven Van Dyck 著者
The catapult is now painted, varnished and then polished from glossy to satin. The projectiles were left unpainted to avoid chipping during use. The metal parts were done in AK True Metal gold, Vallejo Metallic Grey and Vallejo gloss black.

Holger Kranich
Well done, Steven, well done!

Steven Van Dyck 著者
Thank you, guys. It got silver and bronze once, now one color is still missing...

Steven Van Dyck 著者
This event had a contest where I won 3 gold medals and one silver.

Steven Van Dyck 著者
Thanks, guys, now the project is really finished. I replaced the glass showcases with a better fit, but I still needed to cut into the wood frame. The new ones were visible at IPMS the Netherlands, where Hancock won bronze and Essex silver. Also toiled on the ModelMonkey resin floater nets, first trying to saw these in half to make them fit but then just cutting the sides off them. You see some attempts to clue them to a tile with CA and kit, to be able to saw the resin under water, but this doesn't hold for 5 minutes... At last after the cutting I was able to paint, wash and dry-brush them. And that fit quite easy now.

gorby
Congratulations on the awards, very well deserved as these are absolutely remarkable models.