ウォール
Wall

新しいフォトアルバムを追加しました。
すべてのコメント (12) » 40 16 July 2024, 13:41

If still relevant.
Pic 43-45. Before gluing the fuselage roof to the lower part, I glued 2 spacers from sprue scraps between the walls.
Pic 46 and 47.
I simply cut off the inner side of the hood wall, leaving the outer side untouched, achieving a tight fit along the outer surface. And I puttyed a little bit on the front of the hood.
24 September 2024, 08:14
February 1, 2025
December 23, 2024

Whats a good way to keep custom numbers lined up? I've been just eyeballing it and i feel like the decals always end up looking a little bit tilted
23 December 2024, 20:56

you could try with a piece of masking tape a bit lower than the correct location, and align the carrier firm to it (but not covering the tape to avoid problems when you lift it) . if all decals are from same set, should fave more or less same excess carrier form and align nicely . just an idea
1 23 December 2024, 21:19
November 8, 2024
August 22, 2024

It seems like hawk graphics is closed down 🙁 . Anyone have any recommendations for how I can get like, a custom print of waterslide decals to replicate the sets they sold?
3 June 2024, 12:24

The web site is still reachable and so not mention a close down, but I have not checked phon number or email. But yes, the newest decals marked with "NEW" are from 2012.
May be you can find a mate with the set in stash to do a high resolution scan for a print? The quality will not be same I guess and white is not easy to print.
3 June 2024, 12:56

I had good luck with stsdecals.com - if you send them a scan of what you want, they can print them. The ones I ordered were thin and strong.
22 August 2024, 01:46
August 19, 2024
August 18, 2024

新しいフォトアルバムを追加しました。
121 画像
Oliver Hazard Perry Build
1:350
Final coat of varnish after attaching the flight deck nets. She looks amazing.
プロジェクト: USS Ford (FFG-54)
すべてのコメント (11) » 38 8 March 2024, 03:26

Thank you all for the feedback and support! I really loved building this kit, and I loved all the details of the OHP class that I learned in the process. This kit really was an amazing way to get into modeling.
17 August 2024, 00:59
July 16, 2024
July 15, 2024

新しいフォトアルバムを追加しました。
This album no longer exists
0 画像
Seasprite Color referencesThis album does not contain any images.
1:72
プロジェクト: LTCMD Tom Bryan's UH-2A
15 July 2024, 11:23
June 16, 2024
June 14, 2024
June 10, 2024
June 3, 2024
May 25, 2024
May 24, 2024
May 21, 2024
May 16, 2024
May 15, 2024
May 10, 2024

will attend

Sea Patrol Aircraft Flying Boats or Land Based will do! All nations and time?
1. 6月 2023 まで 31. 5月 2024
1. 6月 2023 まで 31. 5月 2024
10 May 2024, 19:41

新しいフォトアルバムを追加しました。
5 画像
Crimson Skies warbird
1:200
did a tamiya panel liner wash over the whole thing, which honestly looks really good but i have to get all the cotton bu...
プロジェクト: Crimson Skies Bell Valiant MkII
Scratchbuilt
4 7 May 2024, 02:05
May 8, 2024
May 7, 2024

First three day weekend I've had in a while that's not full of stressful tasks, so what do I decide to do? Clean the basement so I can set up a new workbench. Amazing choice NLAWS, your commitment to not just relaxing remains unchallenged.
1 5 May 2024, 17:49

😄 😄 😄
Sounds very much like the old me. The new me does relaxing faultlessly. 🙂
7 May 2024, 09:53
May 6, 2024
May 5, 2024

What's the best way to measure masking for antifouling paint on a hull?
5 May 2024, 00:43
May 4, 2024

One nice thing about having a British mother in law is that apparently she just... Has airfix kits lying around? Came home from a late shift the other day and there was just a BAe Hawk 1:72 kit sitting on the counter??!?
1 4 May 2024, 21:29
May 3, 2024
May 1, 2024
April 28, 2024
April 27, 2024

新しいフォトアルバムを追加しました。
131 画像
Kingfisher build
1:72
"navy" decal is taken from an ICM 1:48 scale firebee kit, but I really wanted some white lettering on here
プロジェクト: Vought Kingfisher
すべてのコメント (46) » 43 13 March 2024, 15:12
April 26, 2024
April 22, 2024
April 21, 2024
April 20, 2024

First hour spent getting the hang of airbrushing! Wife really must love me cuz she got me a compressor, spray booth and airbrush for my birthday! Used vallejo gray primer to practice on some small parts, but seem to have spent most of it priming my fingertips! X0 regardless, I can already see how this is a game changer, so excited to learn this new skill!
2 18 April 2024, 18:45

How is your first experience with an airbrush going? It can be quite frustrating to start with but well worth it in the end. I found Tamiya acrylic the easiest paint to spray, with Vallejo a little less easy, Revell a lot less easy and Humbrol acrylic impossible.
Hope you get the hang of it.
20 April 2024, 07:21

It seems to be going well! learning the different pressures and thinning consistencies is difficult but its all part of the process, and I'm definitely starting to understand how much you need to keep the brush moving and not hold on one spot. So far I've used some Tamiya lacquer and some Vallejo primer, but im going to be using more tamiya acrylic soon! Thank you for the encouragement!
20 April 2024, 13:35
April 19, 2024
April 18, 2024
April 17, 2024
April 15, 2024
April 12, 2024
April 11, 2024
April 10, 2024
April 1, 2024
March 31, 2024
March 29, 2024
March 28, 2024
March 26, 2024
March 22, 2024
March 21, 2024

Where are we at on using cellulose thinner? Is it a decent replacement?
21 March 2024, 23:21
March 20, 2024
March 19, 2024
March 17, 2024
wnolder.php?lang=ja
2024-03-17 05:02:57
2024-02-24 00:03:55
139581
/ajax/wnolder.php?lang=ja&sd=2024-03-17 05:02:57&md=2024-02-24 00:03:55&filter=&w=139581
todo