ウォール
Wall
March 13, 2025
March 6, 2025
Bernhard Schrock新しいフォトアルバムを追加しました。
すべてのコメント (230) » 193 30 March 2024, 15:44
February 27, 2025
February 22, 2025
Bernhard SchrockExactly 4 months ago my Mk-41 was finished, at least the fuselage. That's how long I've been waiting for Jam Screw's main rotor head. Since yesterday, waiting is now history.
Was it worth the wait, you'll ask? Definitely yes! Considering the content of the 2 boxes, I would have waited another four months!
It is a masterpiece of 3D construction. The depth of detail is unsurpassed and in my opinion cannot be surpassed! As already described in the unboxing of the landing gear, the „preparation" of the 3D model for 3D printing is also an art in itself. This feat JS has masterfully solved.
The „support pillars" are numerous, but so cleverly placed and so fine that it is no problem to prepare the part. There are also no pimples on the surface.
To warm up, I separated the „red", „black" joints, swash plate and lower part of the stern and only took about 20 minutes.
The instructions are exemplary and include more than dozen steps on 6 pages. Absolutely remarkable is the fact that the differences in the three types of blade joints were taken into account with absolute precision.
Will be continued…
🙂🙂🙂🙂🙂🙂🙂
2 20 February, 07:29
Bernhard Schrock 著者As promised the first update.
Take your time to separate the parts and handle them. Everything is very filigree.
As described in the instructions, the 2 x 5 holes in the 2 stars (parts #D and #E) must be carefully adjusted to the diameter of the pins of the parts #K. Here I first used 1.15 mm and finally 1.20 mm drills. Everything holds so together without glue and the 5 parts #K can be aligned. I recommend combining the axle (Part #A) with a brass tube with about 2.15-2.2 mm diameter.
At this point a supplement: there are not three different joints but five! Although I have already built two Sea kings, I was not aware of it: with joints on one side, the hinges have different angles. Will be continued. 🙂
2 22 February, 06:50
January 29, 2025
January 20, 2025
Bernhard Schrock新しいフォトアルバムを追加しました。
すべてのコメント (24) » 55 2 September 2024, 18:55
Zbynek HonzikAnother amazing gem for the helicopter collection. Fantastic work and great inspiration!
Thank you Bernhard for pleasing the modeller's eye!
1 19 January, 21:59
January 14, 2025
Bernhard Schrock新しいフォトアルバムを追加しました。
すべてのコメント (203) » 113 19 April 2021, 11:44
January 12, 2025
Bernhard SchrockToday I took a very close look at the MRH I bought a few months ago and compared it with original photos.
At first glance, the product looks good. Unfortunately, I was a bit disappointed because I immediately discovered an error: the „red" blade, which points backwards when folding, has no hydraulics and no mechanics in the original. At BAM it is designed in the same way as the „white" and the „black" blade (left side when folding). After removing the surplus components (correcture), the blade joint looks very far from the original 🙁. Correcting is very difficult because the material is very brittle.🙁
I also miss the „boom" on the top side, to which the main E-cable and three hydraulic lines are attached. Furthermore, I miss on the side opposite the pitch link arm with „white", „black", „blue" and „yellow" blades a important hydraulic component (control cylinder unit) to which four lines (1 x E and 3 x hydraulics) are attached.
Conclusion:
Detailing is better compared to the kit, but unfortunately with some errors.
I will definitely not use it.
12 January, 08:00
January 9, 2025
Bernhard SchrockIt took me a whole 4 years to realize that this product exists. And another two years until I really hold it in my hands. I am thrilled even though it is 1:35 for the scale. All elements are still small and fine enough to be used in airplanes and helicopters in 1:48. Spark plugs or as a plugs for hydraulic hoses and other electrics. 🙂🙂🙂
9 January, 15:30
January 5, 2025
December 30, 2024
Bernhard Schrockwill attend
Internationale Modellbau Show Lübeck
Lübeck
26. and 27. 4月 2025
Lübeck26. and 27. 4月 2025
30 December 2024, 15:49
Bernhard Schrock 著者A great pleasure to see that you organize a model show again! 🙂🙂🙂
30 December 2024, 15:50
December 29, 2024
December 21, 2024
AMP 1:48December 10, 2024
Bernhard SchrockHere, too, I was able to follow the growt „live": it doesn't get any better! Even the brown blankets with the inscription BUND (!!!!) are there. Here the same applies; another early Mk.41 will follow!l
2 10 December 2024, 09:57
Bernhard Schrock 著者I have read the instructions again carefully: IMO the idea of curing the parts in sunlight by the modeler himself is absolutely brilliant! How often I have parts broken off during separating the components despite the greatest effort and caution.
HeloStuff think along!
1 10 December 2024, 10:19
Bernhard SchrockConsidering this quality, I will definitely build another Mk.41. I had the opportunity to follow how the set came about and know what I'm talking about.🙂🙂🙂
3 10 December 2024, 09:51
November 22, 2024
Bernhard SchrockI hold the part in my hand and almost don't want to believe what I see there. A masterpiece of 3D design and shape design. Constructing and printing is one thing, but designing the part in such a way that you can get it free without damage is an art! This feat is very successful in Jam-Screw. After a few minutes, the part got free without damage.
2 27 May 2024, 16:38
Bernhard Schrock 著者Today I took a second look at the parts and am even more enthusiastic. On the rear wheel suspension leg, even the eyelet for lashing is shown at the back. At most 0.2 mm thick... The wheels are bulging not only flat at the bottom. Big difference to the „only flattened".
1 29 May 2024, 08:10
Doug EbyThese comments are so useful when considering 3D printed parts or any AM accessories, for that matter - there are so many new manufacturers out there and you often have no idea what you'll get. Thank you for taking the time to do this!
1 22 November 2024, 23:24
November 21, 2024
Bernhard Schrockwill attend
Euro Model Expo - Gold Edition Lingen
29. and 30. 3月 2025
Lingen29. and 30. 3月 2025
21 November 2024, 04:45
November 18, 2024
November 16, 2024
Bernhard Schrock新しいフォトアルバムを追加しました。
すべてのコメント (234) » 36 8 March 2015, 19:18
November 14, 2024
November 3, 2024
Bernhard Schrock新しいフォトアルバムを追加しました。
すべてのコメント (143) » 37 18 July 2016, 17:05
Kurt FankhauserI am currently working on this model and was looking for someone who had built it before to see how to do the bombardier's seat and kneeling pad. Wow! This is amazing! Thanks for the detailed photos. But now I feel like boxing mine back up and picking a different hobby. 😉
3 November 2024, 04:31
Bernhard Schrock 著者I'm veeeery glad to see this model in the „charts" again! I'm very honored by you comments. Kurt: do you have started the WIP thread yet? This aircraft is one of those that interests me very much, especially since there are hardly any finished models. No wonder the kit is a tough chunk! Please note that I have changed by mistake the seat cushion and backrest on the front seat. When I realized it, it was already too late to correct it.
3 November 2024, 19:40
October 31, 2024
September 27, 2024
September 2, 2024
July 4, 2024
Bernhard Schrock新しいフォトアルバムを追加しました。
すべてのコメント (11) » 21 9 March 2023, 19:09
gorbyMissed this the first time around. Thanks for the photos Bernhard, some outstanding models on display.
4 July 2024, 10:15
Vintagemodelerthese is incredible outstanding!! just cant believe it it has every rivet
4 July 2024, 10:21
June 4, 2024
Bernhard Schrockこのアイテムを所有しています
3D Decal Helicopter Seatbelts for UH-1D, Bo-105, Alouette etc.
DF HeloStuff 1:48
DF82948 2021 新金型 マルチトピック (6)4 June 2024, 09:46
Bernhard Schrockこのアイテムを所有しています
Sea King Mk3
Sea King EAPS filter. For Airfix kit. Sea King Mk 50, 41, HU5, HC4 JAM-SCREW 1:48
48-102 2024 新金型 4 June 2024, 09:42
May 29, 2024
Bernhard SchrockI looked at the contents of the box for several minutes to understand why there are so many parts.
First, the box contains parts for one tailrotor with 5 and AND one tailrotor with 6 blades. This covers all variants. 🙂
In addition, Jam-Screw offers the model builder the choice between a „fast“ path and a universal path to build his tailrotor.
The quick way means that the entire rotor is assembled from 6 or 7 parts: the complete rotorhead (including the pitchlinks!!!!) and 5 or 6 blades.
The universal way looks like each blade can be mounted in any position. This means that the blades can have a negative or a positive pitch
All blades can also be swivelled in the parking position. In the second case, there are 22 or 26 parts that a rotor consists of. The „rasterization“ is hardly visible to the naked eye and I suspect that after painting it is not perceptible. Great great great!
1 29 May 2024, 08:33
May 28, 2024
Bernhard SchrockThe winch were also included in the package yesterday. Anyone who wants to build a german MK 41 can’t avoid this part. Here, too, the quality is excellent: even the cylindrical part on the housing is precisely reproduced (probably a kind of electrically hydraulic component). Actually, it’s „too bad“ to install the part: then you can no longer see that even the drum with the wire/rope is shown on the inside. Highly recommended.
28 May 2024, 06:37
May 27, 2024
Bernhard SchrockToday the package arrive and I just unpacked the part... I'm thrilled! The depth of detailing is fantastic. Each screw is on right place even the 4 wing nuts on the maintenance panel at the top! Microscopically small and a challenge not to break them off during assembly and painting. Highly recommend! 🙂🙂🙂 thx Jam-Screw for this magnificent part.
Sea King Mk3
Sea King EAPS filter. For Airfix kit. Sea King Mk 50, 41, HU5, HC4 JAM-SCREW 1:48
48-102 2024 新金型 27 May 2024, 16:08
April 30, 2024
Bernhard Schrock新しいフォトアルバムを追加しました。
すべてのコメント (111) » 113 30 January 2017, 20:12
Bernhard Schrock 著者I am honored by your comments. Thank you.🙂
Spanjaard: 2024 I will visit the EME silver edition and the Avenger will be on board. 🙂
3 August 2023, 14:53
April 26, 2024
Bernhard SchrockJust finished the detailing of the KIT part and I can notice that Jam-Screw done excellent research. The 3D printed radome is exactly matching the original. Even the different type of fasteners/closures is represented correctly. Highly recommend. 🙂🙂
26 April 2024, 16:46
April 15, 2024
Bernhard SchrockFirst look: excellent quality. Second look: excellent quality and excellent research and accuracy!! Very highly recommended!🙂
1 15 April 2024, 05:30
April 4, 2024
April 2, 2024
Bernhard Schrock新しいフォトアルバムを追加しました。
すべてのコメント (62) » 99 27 February 2023, 16:50
Bernhard Schrock 著者Thank you for you comments and praise. I'm glad that you like my last helicopter. 🙂 I will will show the Mmdel on EME 2025 in Lingen.
1 April 2024, 11:36
bughunterI hope this will not be your last helicopter, because these are always masterpieces 👍 It was a pleasure to see your models and meet the builder at the EME. See you next year!
2 April 2024, 21:36
March 31, 2024
Bernhard Schrock新しいフォトアルバムを追加しました。
32 画像
Z-37 Čmelák
1:48
Anti skid surface created as usual of airbrushed decalfilm (unthinned dark grey paint and low pressure)
プロジェクト: Z-37 Čmelák OK-WJT
すべてのコメント (43) » 41 27 September 2021, 13:25
Lochsa RiverIt must be you, Bernhard...there was no photoetch to be seen....excellent and as always a joy to look at your work, sir.
13 November 2021, 10:57
DuperScaleI just managed to get my hands on this Kit. Awesome result you have there. Really nice
31 March 2024, 13:49
March 25, 2024
Bernhard Schrock新しいフォトアルバムを追加しました。
17 画像
EME 2024
No
It was a big pleasure to meet Mr. bughunter and see his great biplanes live :):)
プロジェクト: EME 2024
Scratchbuilt
すべてのコメント (6) » 18 16 March 2024, 15:16
wnolder.php?lang=ja
2024-03-25 20:30:00
2013-08-31 15:26:36
14143
/ajax/wnolder.php?lang=ja&sd=2024-03-25 20:30:00&md=2013-08-31 15:26:36&filter=&w=14143
todo